Kodak 2100 manual Networking Your Printer

Networking Your Printer

The Wi-Fi connectivity LED blinks as the printer searches for available wireless networks within range, then displays the list in order of signal strength. For example:

If there are more networks than can be shown on the LCD, a (page down) symbol appears in the bottom right of the display.

4.Press to select your network, then press OK.

If you don’t see your network in the list, or if you want to change your network, select Rescan for Wireless Networks, then press OK.

NOTE: If the name of your network is not listed, make sure your wireless router is turned on and within range. If the name of your network is still not listed, go to www.kodak.com/go/inkjetnetworking for more information.

5.If your network requires a password, use the LCD keyboard to enter your Security String. The Security String is case-sensitive.

On the control panel, press , , or to select the letters and numbers, using the correct uppercase and lowercase letters.

Press OK after each character. When you are finished, select DONE, then press OK

6. When the confirmation message appears, press OK.

16 www.kodak.com/go/aiosupport