Faxing
Receiving a fax manually
If Auto Answer is turned off for your printer, you can receive incoming faxes manually.
NOTE: You can receive any incoming fax manually, even if Auto Answer is turned on.
To receive a fax manually:
•When you hear the phone ring, press Start Black or Start Color.
NOTE: Pressing either Start button triggers the printer to receive the fax. It does not matter which Start button you press; whether a fax is color or black and white is determined by the sender.
If your printer is connected to the same phone line as another telephone and you are using tone dialing (see Dialing Mode, page 67), you may receive an incoming fax manually from another phone. When you hear the distinctive ring of your fax line or know that the incoming call is a fax:
• Pick up any phone and dial 234 (the remote access code).
Printing fax reports
You can set up the printer to print certain reports automatically. You can also print reports manually at any time. Fax Settings report
Fax settings report
To print the current fax settings:
1.Press Home.
2.Press 
to select Fax Settings, then press OK.
3.Press 
to select Print Fax Settings, then press OK.
4.Load letter or A4 paper, then press Start Black or Start Color
74 | www.kodak.com/go/aiosupport |
