Kodak 2100 manual Networking Your Printer, Connecting to a wireless network, Before you connect

2

Networking Your Printer

This section explains how to configure your wireless network settings.

Connecting to a wireless network

To connect your printer to an 802.11b/g/n wireless (Wi-Fi) network, refer to the following information.

Before you connect

You need:

•a wireless router.

•to determine whether your wireless router supports Wi-Fi Protected Setup (WPS).

NOTE: If you have specific questions about your router, see your router manufacturer’s documentation for more information.

For information, go to www.kodak.com/go/inkjetnetworking.

Connecting to a wireless network using the Wi-Fi Setup Wizard

You can use the Wi-Fi Setup Wizard on the printer to connect to your wireless network. Read the following procedures and use the one that is appropriate for your network setup.

Connecting to a non-WPS wireless router

To connect your printer to your wireless network, you need to know the network name, also called the Service Set Identifier (SSID). You can obtain your network name from the wireless router.

If your network has security enabled, you also need to know the Security String (passphrase or password).

Record your network information in the spaces below, using the correct uppercase and lowercase letters.

Network Name (SSID): ________________________________________

Security String (case-sensitive): ________________________________

1.Press Home.

2.Press to select Network Settings, then press OK.

3.With Wi-Fi Setup Wizard selected, press OK.

NOTE: The Wi-Fi radio turns on when you select Wi-Fi Setup Wizard.

www.kodak.com/go/aiosupport 15