Kodak 2100 manual Select Yes to disable call waiting, then

Faxing

	Fax Option	Settings	Description
	Disable Call Waiting	No (default) / Yes	If you have call-waiting service on your
			phone line, you can disable it so that an
			incoming call does not interrupt your fax
			transmission.
			Select Yes to disable call waiting, then
			enter the call waiting disable code
			(below).
	Call Waiting Disable	*70 (default)	The printer automatically dials the call
	Code		waiting disable code before dialing the
			number to which you are sending a fax.
			This code disables call waiting for the
			duration of the fax, preventing incoming
			calls from interrupting your fax
			transmission.
			The usual code to disable call waiting is
			the default *70. If the call waiting disable
			code is different in your area, press OK,
			then press	to erase the current code.
			Use the keypad to enter the correct
			code, then press OK.
			NOTE: You must enable call waiting
			manually after your fax
			transmission.
	Distinctive Ring	Any ring (default) /	This service, available from most phone
		Single Ring / Double	companies, adds multiple phone
		Ring / Triple Ring	numbers to one phone line. Each phone
			number then has a distinctive ring
			pattern (single, double, or triple ring) to
			let you know which number is ringing.
			Select the ring pattern assigned to the
			phone number for the printer so the
			printer can receive faxes automatically.
	Fax Speed	Fast - 33.6K (default)	Use this setting to reduce the fax
		Medium - 14.4K	transmission speed of your printer if you
		Slow - 9.6K	have difficulty with faxing at higher
			speeds.
	Fax Speaker	On (default) / Off	The fax speaker allows you to hear the
			dial tone and initial fax tones when
			sending faxes.
	Print Fax	Never (default) /	The Fax Confirmation Page contains the
	Confirmation Page	Always / After Failure	time and date, the number you called,
		Only	the number you called from, and
			whether the transmission was
			successful.
66	www.kodak.com/go/aiosupport