Basic Features
■■ Audio Format
(digital channels only)
Select the audio format. ■■ Audio Description
(not available in all locations) (digital
channels only)
This function handles the Audio Stream
for the AD (Audio Description) which is sent along with the Main audio from the broadcaster.
✎✎ Audio Description (Off / On): Turn the audio description function on or off.
✎✎ Volume: Adjust the audio description volume.
Additional Settings
■■ DTV Audio Level (MPEG /
✎✎ According to the type of broadcast signal, MPEG /
✎✎ To increase or decrease the volume, adjust between the range 0 and
■■ Dolby Digital Comp (Line / RF): This function minimizes signal disparity between a dolby digital signal and a voice signal (i.e. MPEG Audio,
✎✎ Select Line to obtain dynamic sound, and RF to reduce the difference between loud and soft sounds at night time.
Line: Set the output level for signals greater or less than
RF: Set the output level for signals greater or less than
Speaker Settings
■■ Auto Volume (Off / Normal / Night): To equalize the volume level on each channel, set to Normal.
Night: This mode provides an improved sound experience compared to Normal mode, making almost no noise. It is useful at night.
Reset Sound (Yes / No)
Reset all sound settings to the factory defaults.
¦¦ Selecting the Sound Mode t
When you set to Dual fg, the current sound mode is displayed on the screen.
| Audio | Dual | Default | |
| Type | |||
|
|
| ||
A2 | Mono | Mono | Automatic | |
Stereo | Stereo ↔ Mono | change | ||
Stereo | ||||
Dual | Dual f ↔ Dual g | Dual f | ||
| ||||
| Mono | Mono | Automatic | |
NICAM | Stereo | Mono ↔ Stereo | change | |
Stereo | Dual | Mono ↔ Dual f | Dual f | |
| Dual g | |||
|
|
|
✎✎If the Stereo signal is weak and an automatic switching, occurs, then switch to the Mono.
✎✎Only activated in stereo sound signal.
✎✎Only available when the input Source is set to TV.
