Xerox N4525 Control Panel Menus, Token Ring Menu Items contd, PostScript, Static, Bootp/Rarp

	Control Panel Menus
Token Ring Menu Items (cont'd.)
AppSocket PDL	Sets the default Print Description Language emulation for the Token Ring
	AppSocket interface.
	Values:
	Auto (default)
	PCL
	PostScript
AppSocket Bin PS	Sets the AppSocket binary mode of PostScript.
	Values:
	On
	Off (default)
TTalk Enable	Sets the Token Ring TokenTalk protocol.
	Values:
	On (default)
	Off
HTTP Enable	Sets the Token Ring HTTP Server protocol.
	Values:
	On (default)
	Off
Auto IP Address	Enables/disables the generation of an IP address by the printer if the DHCP
	server does not respond with an IP address.
	Values:
	On (default)
	Off
IP Address Res	Sets the method used to resolve (assign) the IP address, including Sub Net
	Mask and Default Gateway.
	Values:
	Static
	BOOTP/RARP
	DHCP (default)
IP Address	Sets the four byte IP address. (This menu item only appears if IP Address
	Res is set to static.)
	Values:
	xxx.xxx.xxx.xxx
	where xxx = 000 to 255
	Note: Once the control panel shows Sub Net Mask on the top line, use the
	Value keys (labeled 3 or 7) to scroll to the desired value at the cursor
	location. To move the cursor, use the Item keys (labeled 2 or 6). Thus, you
	can change characters within the address rather than having to re-enter the
	entire address.
Sub Net Mask	Sets the four byte Sub Net Mask address. (This menu item only appears if IP

Address Res is set to static.)

Values:

xxx.xxx.xxx.xxx where xxx = 000 to 255

Note: Once the control panel shows Sub Net Mask on the top line, use the Value keys (labeled 3 or 7) to scroll to the desired value at the cursor location. To move the cursor, use the Item keys (labeled 2 or 6). Thus, you can change characters within the address rather than having to re-enter the entire address.

Advanced Features and Troubleshooting Manual 29