|
| Control Panel Messages |
|
| |
Error | Description and corrective action | |
|
| |
3000 | A fault condition has occurred in the Ethernet interface. | |
| ■ | Power OFF the printer, reseat the interface card, and then power ON the |
|
| printer. |
| ■ | If this code appears again at Power ON, contact your Customer Support |
|
| Center. |
|
| |
5000 | A fault condition has occurred. | |
| ■ | Power OFF and Power ON the printer. |
| ■ | If this code appears again at Power ON, contact your Customer Support |
|
| Center. |
|
| |
All Jobs | Appears when using the secure print feature. | |
Delete | ■ | Press the Enter key (labeled 4) to delete all secure jobs in your queue. |
| ||
| ■ Press the Value keys (labeled 3 or 7) to toggle between Delete and Print. | |
|
| |
All Jobs | Appears when using the secure print feature. | |
■ | Press the Enter key (labeled 4) to print all secure jobs in your queue. | |
| ||
| ■ Press the Value keys (labeled 3 or 7) to toggle between Delete and Print. | |
|
| |
Canceling Job... | Tells you that a job is being cancelled. | |
Job name |
|
|
|
|
|
Check | ■ | Verify that the stapler cartridge has been installed and is in position. |
Staple Cartridge | ■ | Verify that the stapler cartridge contains staples. |
| ||
|
|
|
Clear Area A | ■ | Clear the paper jam in Area A at the Envelope Feeder or the Bypass Feeder |
Reset Env/Bypass |
| (see the Paper Jams section of the User Guide), then reset Env/Bypass. |
|
|
|
Clear Area A | ■ | Clear the paper jam in Area A (see the Paper Jams section of the User Guide), |
Reset Tray 1 |
| then reset Tray 1. |
|
|
|
Clear Area B | ■ | Clear the paper jam in Area B (see the Paper Jams section of the User Guide), |
Reset Tray 2 |
| then reset Tray 2. |
|
|
|
Clear Area C | ■ | Clear the paper jam in Area C (see the Paper Jams section of the User Guide), |
Reset Tray 4 |
| then reset Tray 4. |
|
|
|
Clear Area C | ■ | Clear the paper jam in Area C (see the Paper Jams section of the User Guide), |
Reset Tray 5 |
| then reset Tray 5. |
|
|
|
Clear Area A,B | ■ | Clear the paper jam in Area A and Area B (see the Paper Jams section of the |
Reset Tray 2 |
| User Guide), then reset Tray 2. |
|
|
|
Clear Area A,B | ■ | Clear the paper jam in Area A and Area B (see the Paper Jams section of the |
Reset Tray 3 |
| User Guide), then reset Tray 3. |
|
|
|
Clear Area A,B,C | ■ | Clear the paper jam in Area A, Area B, and Area C (see the Paper Jams section |
Reset Tray 4 |
| of the User Guide), then reset Tray 4. |
|
|
|
Clear Area A,B,C | ■ | Clear the paper jam in Area A, Area B, and Area C (see the Paper Jams section |
Reset Tray 5 |
| of the User Guide), then reset Tray 5. |
|
|
|
Clear Area H | ■ | The Finisher compiler tray (Area H) safety switch is on. Remove the obstacle |
|
| from Area H. |
|
|
|
Close Door A | ■ | Close Door A. |
|
|
|
Close Door B | ■ | Close Door B. |
|
|
|
Close Door C | ■ | Close Door C. |
|
|
|
Close Door E | ■ | Close Door E (the gate cover of the finisher). |
|
|
|
Close Door F | ■ | Close Door F (the transport cover of the finisher). |
|
|
|
Advanced Features and Troubleshooting Manual | 89 |