Xerox manual Control Panel Messages, DocuPrint N4525 Network Laser Printer

Control Panel Messages

Error	Description and corrective action
Insert Tray 1	The printer cannot feed from Tray 1.
	■ Make sure Tray 1 is properly inserted in the printer.
Insert Tray 2	The printer cannot feed from Tray 2.
	■ Make sure Tray 2 is properly inserted in the printer.
Insert Tray 3	The printer cannot feed from Tray 3.
	■ Make sure Tray 3 is properly inserted in the printer.
Insert Tray 4	The printer cannot feed from Tray 4.
	■ Make sure Tray 4 is properly inserted in the printer.
Insert Tray 5	The printer cannot feed from Tray 5.
	■ Make sure Tray 5 is properly inserted in the printer.
Install	The Laser Print Cartridge is missing or is not installed correctly.
Print Cartridge	■ Re-install the existing laser print cartridge or install a new one.
	■ If the problem persists, contact your Customer Support Center.
Install	The Finisher is out of staples.
Staple Cartridge	■ Remove the empty Staple Cartridge and install a new one. (Refer to the
	Adding Staples section in the User Guide.)
IOT Memory Fail	The Print Engine (IOT) memory has failed and printing cannot resume.
Power Off/On	■ Power OFF and ON the printer.
	■ If this message reappears, contact your Customer Support Center.
IOT NVM Fail	Nonvolatile Memory (NVM) has failed on the print engine (also called the
Power Off/On	IOT—Image Output Terminal). Printing cannot resume.
	■ Power OFF and ON the printer.
	■ If this message reappears, contact your Customer Support Center.
Job n	Appears when using the Password Menu to select a specific secure job or proof
	job to be printed or deleted. If the job was given a name, that name appears in
	place of “Job n”.
	■ Print or delete the job as described in the following two messages.
Job n	Appears when using the Password Menu to select a specific secure job or proof
Delete	job to be deleted. If the job was given a name, that name appears in place of
	“Job n”.
	■ Press the Enter key (labeled 4) to delete the job.
	■ Press the Value keys (labeled 3 or 7) to toggle between Delete and Print.
Job n	Appears when using the Password Menu to select a specific secure job or proof
Print	job to be printed. If the job was given a name, that name appears in place of
	“Job n”.
	■ Press the Enter key (labeled 4) to print the job.
	■ Press the Value keys (labeled 3 or 7) to toggle between Delete and Print.
Laser Failure	The laser assembly has failed and printing cannot continue.
Power Off/On	■ Power OFF and ON the printer.
	■ If this message reappears, contact your Customer Support Center.

92 DocuPrint N4525 Network Laser Printer