Control Panel Messages
Error | Description and corrective action | |
|
| |
Ready | The printer is online and waiting for data to print. | |
|
| |
Remove Output | The | |
■ | Remove the output from the | |
| ||
|
| |
Remove Output | ■ Remove the output from the Finisher bin. Depending on the Output Timeout | |
from Finisher |
| setting (in the System Menu), the printer either stops printing or directs the |
|
| output to the |
|
| |
Replace Print | The Laser Print Cartridge has reached its end of life. Printing cannot resume. | |
Cartridge | ■ | Replace the cartridge. |
| ||
|
| |
Reset | ■ Clear the paper jam in the Envelope Feeder or Bypass Feeder (see the Paper | |
ENV/Bypass |
| Jams section of the User Guide) and then reset the Envelope Feeder or Bypass |
|
| Feeder. |
|
| |
Reset Trays 2,3 | Clear the paper jams in trays 2 and/or 3 (see the Paper Jams section of the User | |
| Guide) and then reset the trays. | |
|
| |
ROS Trouble | There is a problem with the ROS controlling ASIC. | |
Power Off/On | ■ | Power OFF the printer and power it ON again. |
| ||
| ■ | If the message appears again, contact your Customer Support Center. |
|
| |
Slide In | The Finisher guide rail is not entirely in position. | |
Finisher | ■ Slide the guide rail into position. Make sure it is securely snapped into the | |
| ||
|
| console. Check to see that the thumb screw that connects it to the Finisher is |
|
| hand tightened. |
|
| |
SNMP Resetting | SNMP MIB data base is being | |
| ■ | Wait. |
|
| |
Staple Failure | Staple Failure. | |
| ■ | Power OFF and ON the printer. |
|
| |
Toner Low | Toner is getting low in the Laser Print Cartridge. Printing will continue | |
| without interruption until the cartridge is empty. | |
| ■ Replace the cartridge as soon as possible. | |
|
| |
Tray 1 Empty | Tray 1 is no longer being used to print because it is empty. | |
| ■ Refill tray 1 if it is to be used again. | |
|
| |
Tray 2 Empty | Tray 2 is no longer being used to print because it is empty. | |
| ■ Refill tray 2 if it is to be used again. | |
|
| |
Tray 3 Empty | Tray 3 is no longer being used to print because it is empty. | |
| ■ Refill tray 3 if it is to be used again. | |
|
| |
Tray 4 Empty | Tray 4 is no longer being used to print because it is empty. | |
| ■ Refill tray 4 if it is to be used again. | |
|
| |
Tray 5 Empty | Tray 5 is no longer being used to print because it is empty. | |
| ■ Refill tray 5 if it is to be used again. | |
|
| |
Tray n Lifting | The specified tray has been refilled, is rising into position and will soon be | |
| ready for printing. | |
|
|
|
96 | DocuPrint N4525 Network Laser Printer |