Xerox manual Control Panel Messages, DocuPrint N4525 Network Laser Printer

Control Panel Messages

Error		Description and corrective action
0010	-DISK	A fault condition has occurred.
		■	Power OFF and Power ON the printer.
		■	If this code appears again at Power ON, contact your Customer Support
			Center.
0101	-DIMM1	A fault condition has occurred in DIMM1.
		■ Power OFF the printer, remove and reinstall DIMM1, and Power ON the
			printer.
		■	If this code reappears at Power ON, replace DIMM1.
		Refer to page 11 for location of the memory board.
0102	-DIMM2	A fault condition has occurred in DIMM2.
		■ Power OFF the printer, remove and reinstall DIMM2, and Power ON the
			printer.
		■	If this code reappears at Power ON, replace DIMM2.
		Refer to page 11 for location of the memory board.
0103	-DIMM3	A fault condition has occurred in DIMM3.
		■ Power OFF the printer, remove and reinstall DIMM3, and Power ON the
			printer.
		■	If this code reappears at Power ON, replace DIMM3.
		Refer to page 11 for location of the memory board.
1000	-IOT	A fault condition has occurred.
		■	Power OFF and Power ON the printer.
		■	If this code appears again at Power ON, contact your Customer Support
			Center.
2000	-XIE RAM	A fault condition has occurred.

■Power OFF and Power ON the printer.

■If this code appears again at Power ON, contact your Customer Support Center.

2010 -XIE PWPM A fault condition has occurred.

■Power OFF and Power ON the printer.

■If this code appears again at Power ON, contact your Customer Support Center.

2020	-XIE VDMA	A fault condition has occurred.
		■	Power OFF and Power ON the printer.
		■	If this code appears again at Power ON, contact your Customer Support
			Center.
3000	-Token Ring	A fault condition has occurred in the Token Ring interface.
		■	Power OFF the printer, reseat the interface card, and then power ON the
			printer.
		■	If this code appears again at Power ON, contact your Customer Support
			Center.
3000	-Serial	A fault condition has occurred in the Serial interface.
		■	Power OFF the printer, reseat the interface card, and then power ON the
			printer.
		■	If this code appears again at Power ON, contact your Customer Support
			Center.

88 DocuPrint N4525 Network Laser Printer