Xerox N4525 manual Control Panel Messages, Advanced Features and Troubleshooting Manual

Control Panel Messages

Control Panel Messages

When the printer’s control panel displays a message, find the message in the following table listed in alphabetical order. If there is a problem, perform the corrective action for resolving the problem. If the problem persists, check the Xerox troubleshooting knowledge database on the web at: www.xerox.com/officeprinting/infoSMART or contact your Customer Support Center. See Appendix D - Xerox Customer Support Centers on page 115.

Error	Description and corrective action
0001-ESS	A fault condition has occurred.
	■	Power OFF and Power ON the printer.
	■	If this code appears again at Power ON, contact your Customer Support
		Center.
0001-BASE RAM	A fault condition has occurred.
	■	Power OFF and Power ON the printer.
	■	If this code appears again at Power ON, contact your Customer Support
		Center.
0001-BASE ROM	A fault condition has occurred.
	■	Power OFF and Power ON the printer.
	■	If this code appears again at Power ON, contact your Customer Support
		Center.
0001-ASIC	A fault condition has occurred.
	■	Power OFF and Power ON the printer.
	■	If this code appears again at Power ON, contact your Customer Support
		Center.
0001-TIMER	A fault condition has occurred.
	■	Power OFF and Power ON the printer.
	■	If this code appears again at Power ON, contact your Customer Support
		Center.
0001-PWPM	A fault condition has occurred.
	■	Power OFF and Power ON the printer.
	■	If this code appears again at Power ON, contact your Customer Support
		Center.
0001-DMA	A fault condition has occurred.
	■	Power OFF and Power ON the printer.
	■	If this code appears again at Power ON, contact your Customer Support
		Center.
0001-COMM	A fault condition has occurred.
	■	Power OFF and Power ON the printer.
	■	If this code appears again at Power ON, contact your Customer Support
		Center.
0001-USB	A fault condition has occurred.
	■	Power OFF and Power ON the printer.
	■	If this code appears again at Power ON, contact your Customer Support
		Center.

Advanced Features and Troubleshooting Manual 87