| Control Panel Messages |
|
|
Error | Description and corrective action |
|
|
V x.x | The printer is in Power ON diagnostics. The first line contains the printer |
xx/xx/xx | software version number. The second line contains the creation date of this |
| printer software version. |
| None, if there is no failure during Power ON diagnostics. After other |
| diagnostic messages, the final message will be that the printers is online and |
| waiting for data. |
|
|
Waiting... | The printer was busy processing data from a host but the print job was not |
| completed. |
| This message appears until another print job is received, the Port Timeout |
| expires, the last page timeout expires, or the PostScript “waittimeout” expires. |
|
|
Warming Up... | The Fuser has not warmed up yet. This message disappears when the printer |
| is ready. |
| The message displays at Power ON and may display after the cover has been |
| opened for some time or when the printer is exiting Power Saver mode. |
|
|
Advanced Features and Troubleshooting Manual | 97 |