Xerox N4525 manual Control Panel Menus, System Menu Items contd, Long Edge, Short Edge, Quality

	Control Panel Menus
System Menu Items (cont'd.)
Policy Timeout	Specifies how many seconds the printer should wait before taking the action
	defined by the setting of the Page Policy item.
	Values: (in seconds)
	300
	180
	120
	60
	30 (default)
	0
Print Quantity	Specifies number of copies of each page.
	Values:
	1 - 999 (default is 1)
	Note: The number changes incrementally by 1 each time you press either the
	Value key (labeled 3 or 7). To scroll quickly through the numbers, hold
	down either key.
Duplex	Enables/disables duplex printing for PostScript and PCL jobs. (This menu
	item only appears if the printer has the Duplex Module installed.)
	Values:
	Off (default)
	Long Edge
	Short Edge
	Note: For more information on duplex printing and choosing Long Edge or
	Short Edge, see Printing two-sided (duplex) jobs in the User Guide.
Draft Mode	Enables/disables Draft Mode, which reduces the amount of toner by up to
	two-thirds (and prints a draft-quality output). Intended for occasional (not
	continuous) use.
	Values:
	Off (default)
	On
Edge-to-Edge	Enables/disables edge-to-edge printing.
	Values:
	Off (default)
	On
	Note: Although the printer can address edge-to-edge, there is a 4 mm border
	on all sides where print quality cannot be guaranteed.
XIE	Sets the default Xerox Image Enhancement (XIE) mode:
	■ Smoothes jagged edges.
	■ Fills-in solid fills.
	Values:
	Off (default)
	On
	Note: XIE functions only when Resolution is set to 600x600 and
	Draft Mode is set to Off.
Resolution	Sets the default resolution for PCL and PostScript jobs. (PCL 5e is always set
	to 600x600).

Values:

600x600 (default)

1200 Quality

Advanced Features and Troubleshooting Manual 19