Xerox N4525 manual Control Panel Menus, Reset Menu Items

Control Panel Menus

Reset Menu

Accesses printer reset functions. This menu only appears when the printer is powered on while holding down the On Line and Enter keys (labeled 0 and 4).

Reset Menu Items

Menu Items	Description
Factory Defaults	Resets menus to factory defaults — with the exception of Language in the
	Reset Menu, Defaults in the System Menu, and network parameters
	(in the Ethernet, Token Ring, and Novell menus).
	Values:
	Yes
	No (default)
Network Defaults	Resets parameters in the Ethernet, Token Ring, and Novell menus to factory
	defaults.
	Values:
	Yes
	No (default)
Demo Mode	Places the printer in demo mode.
	Values:
	Yes
	No (default)
	In Demo Mode, you can print different factory-installed demo pages by using
	the eight control panel keys to select the type of demo page and the number
	of copies.
	Once in Demo Mode, the printer re-enters Demo Mode automatically every
	time the power is cycled.
	Exit Demo Mode by powering on the printer while holding down the
	On Line and Enter keys (labeled 0 and 4).
Delete All Jobs	Deletes all secure jobs from the hard disk. (This menu item only appears if
	the optional hard drive is installed.)
	Values:
	Yes
	No (default)
Disk Initialize	Initializes the hard disk. (This menu item only appears if the optional hard
	drive is installed.)
	Values:
	Yes
	No (default)
	Note: This is ignored if the disk is locked (write protected) via a PJL or SNMP
	command.
Disk Format	Formats the hard disk drive. (This menu item only appears if the optional
	hard drive is installed.)
	Values:
	Yes
	No (default)
	Normally, you only use this menu item if the disk was not already formatted.
	If used on a formatted disk, it will write over any existing data on the disk.
	Note: This is ignored if the disk is locked (write protected) via a PJL or SNMP
	command.

Advanced Features and Troubleshooting Manual 35