Xerox N4525 manual Output Selection, Additional PJL Commands, Appendix C - Unique Printer Commands

Appendix C - Unique Printer Commands

Output Selection

The following table lists the output destinations supported by the printer along with the PCL commands and PJL values to select them. (The values listed in the PJL column are the settings associated with the PJL “OUTBIN” variable.)

Output selection

Destination	PCL 5e Command1	PJL (Used by PCL 5e and PCL 6)
		Value for Variable “OUTBIN”
Automatic (no request)	Ec&l0G
Top (Face-down Bin)	Ec&l1G	FACEDOWN or UPPER
Face-Up Bin	Ec&l2G	FACEUP or LOWER or OPTIONALOUTPUTBIN1
Finisher Output Bin	Ec&l4G	OPTIONALOUTPUTBIN2-11

1. The character following the “&” in the command string is the lower case character “L.”.

Additional PJL Commands

The printer supports the standard set of PJL commands. The following table lists the PJL extensions specific to the N4525 printer.

Printer specific PJL commands

Function	PJL Command	Value Range
Start Secure Job	@PJL XSECUREJOB	n/a
Start Proof Job	@PJL XPROOFJOB	n/a
Job Password Assign	@PJL SET XJOBPASSWORD = integer	4-digit string (0-7)
Select Collated Sets	@PJL SET QTY = integer	0-999
Select an Emulation	@PJL ENTER LANGUAGE= “language“	PostScript, PCL, PCLXL
Hard Disk Drive File	@PJL FSDELETE NAME = “pathname“
Delete
Hard Disk Drive File	@PJL FSDOWNLOAD ...
Download
Hard Disk Drive Initialize	@PJL FSINIT VOLUME = “pathname“
Hard Disk Drive Directory	@PJL FSMKDIR NAME = “pathname“
Create
Line Termination	@PJL SET XLINETERMINATION = value	ON, OFF
Page Size Continue (Page	@PJL SET PAGESIZECONTINUE = value	IGNORESIZE,
Policy)		IGNORETYPE,
		IGNORETYPEANDSIZE
Edge to Edge	@PJL SET XEDGETOEDGE = value	ON, OFF
Tray Sequence	@PJL SET XTRAYSEQUENCE = value	TRAYMBF,
		TRAYMBF1,
		TRAYMBF12,
		TRAY12,...
Novell PServer Name	@PJL DEFAULT XPSERVERNAME =	0-47 characters
	“name“

112 DocuPrint N4525 Network Laser Printer