Lexmark C760, C762 manual 3-59, USTATUS Command, Response Syntax

Models: C762 C760

1 402
Download 402 pages 23.32 Kb
Page 138
Image 138

 

3-59

PJL

 

 

 

 

 

 

variable=value

The supported variables are listed in the tables beginning on page 3-12.

This printer returns a ? for inquiries of an unsupported variable, or inquiries of a variable associated with an option that is not installed.

USTATUS Command

This command is used to enable and disable unsolicited status from the printer. Unsolicited status information is sent automatically when an asynchronous event occurs. “Table 3-11: USTATUS Unsolicited Status Variable Values” on page 3-60lists the asynchronous information that can be enabled and disabled.

Syntax:

@PJL USTATUS ustatus variable=value[<CR>]<LF>

Response Syntax:

@PJL USTATUS ustatus variable<CR><LF>

[one or more lines of printable characters, spaces, or tabs]<CR><LF> <FF>

To determine which variables your printer supports, see “Table B-9: USTATUS Unsolicited Status Variables” on page B-14.

See “Status Message Format” on page 3-61for additional information about the messages returned by the INFO STATUS, USTATUS DEVICE, and USTATUS TIMED commands.

Page 138
Image 138
Lexmark C760, C762 manual 3-59, USTATUS Command, Response Syntax