Manuals / Lexmark / Kitchen Appliance / Range

Lexmark C760, C762 manual SET Command, Syntax

Models: C762 C760

1 402

Download 402 pages 23.32 Kb

Page 88

SET Command

3-9

PJL

variable=value

The supported variables and values are listed in the tables beginning on page 3-12.

Note: Variables may be modified by the DEFAULT command, except those marked

Read Only. Some variables may only be modified using the PJL SET command. These variables cannot be modified using the DEFAULT command. They are marked Set Only.

SET Command

This command modifies the current setting for the specified environment variable. The new setting is active immediately, and remains active until the next occurrence of a PJL reset condition.

Use the SET command to modify any currently defined environment variable that cannot be set using the desired printer language. For example, use the PJL SET command to set Print Quality Enhancement Technology (PQET) or Page Protect, which cannot be set within a printer language such as PCL emulation.

Syntax:

@PJL SET [command modifier:value] variable=value[<CR>]<LF>

where

[command modifier:value]

The [command modifier:value] parameter specifies the type of PJL variables to be modified. The variables supported are listed in the tables beginning on page 3-12.

•A [command modifier:value] is not required for variables listed in the tables “Common Variables for Both Printer Languages” on page 3-12,and “Printer Unique Variables for Both Printer Languages” on page 3-19.

•LPARM:PCL is used with variables specific to PCL emulation. (See the tables “Common Variables for PCL Emulation” on page 3-48,and “Printer Unique Variables for PCL Emulation” on page 3-49.)

•LPARM:POSTSCRIPT is used for variables specific for PostScript emulation. (See the tables “Common Variables for PostScript Emulation” on page 3-51,and “Printer Unique Variables for PostScript Emulation” on page 3-52.)

Image 88

Lexmark C760, C762 manual SET Command, Syntax

Contents

March Technical ReferenceSafety Information Edition March1998, 2005 Lexmark International, Inc. All rights reserved UNITED STATES GOVERNMENT RIGHTSYour product uses a laser Contents ContentsTOC-1 PCL EmulationPostScript Emulation TOC-2Contents Switching Languages Printer SpecificationsTOC-3 Flash Memory and DiskTOC-4 PJL SupportPostScript Support IndexOverview CHAPTER 1 IntroductionIntroduction Chapter 5 “Switching Languages” Chapter 2 “PCL Emulation”Chapter 3 “Printer Job Language” Chapter 4 “PostScript Emulation”Chapter 7 “Printer Specifications” Chapter 8 “Printer Interfaces”Appendix A “PCL Support” Appendix B “PJL Support” Appendix C “PostScript Support”Printing the File Navigational TipsIntroduction Bibliography IntroductionUsing SmartSwitch Using the Operator Panel or MarkVision ProfessionalCHAPTER 2 PCL Emulation Selecting PCL EmulationUsing Your Software Program Page Formatting Printable AreasLexmark C760 and C762 Table 2-1 Lexmark C760 and C762 Paper and Envelope Dimensions1 Pel dimensions are for 600 dpi PaperPrint Area Menu Item Table 2-1 Lexmark C760 and C762 Paper and Envelope Dimensions1 Pel dimensions are for 600 dpi EnvelopeNormal setting Whole Page settingOnly Portrait Orientation is shown for all settings PCL Logical Page AreaFont and Symbol Set Support for the Lexmark C760 and C762 PageEdge Formatted Image with Fit to PagePCL emulation. Not all fonts support all symbol sets Standard PCL Emulation Fonts Table 2-2 Forward and Backward Compatibility Font Selection Commands2-10 Type 1 Fonts 2-11Table 2-3 Forward and Backward Compatibility Font Selection Commands 2-12 @PJL RESET@PJL RESET ESC%-12345XSpecialty PCL Fonts 2-13Table 2-4 Forward and Backward Compatibility Font Selection Commands 2-14 Selecting Symbol Sets for the Lexmark C760 and C762Table 2-5 PCL Emulation Symbol Sets - Latin 2-15 Table 2-5 PCL Emulation Symbol Sets Continued - LatinIndicates Typeface supports the specified Symbol Set Indicates Typeface does not support the specified Symbol Set2-16 Table 2-5 PCL Emulation Symbol Sets Continued - LatinIndicates Typeface supports the specified Symbol Set Indicates Typeface does not support the specified Symbol Set2-17 Table 2-5 PCL Emulation Symbol Sets Continued - LatinIndicates Typeface supports the specified Symbol Set Indicates Typeface does not support the specified Symbol Set2-18 Table 2-5 PCL Emulation Symbol Sets Continued - LatinIndicates Typeface supports the specified Symbol Set Indicates Typeface does not support the specified Symbol SetIndicates Typeface supports the specified Symbol Set 2-19Indicates Typeface does not support the specified Symbol Set 2-20 Indicates Typeface supports the specified Symbol SetIndicates Typeface does not support the specified Symbol Set PC-775 Baltic PC-8 LatinIndicates Typeface supports the specified Symbol Set 2-21Indicates Typeface does not support the specified Symbol Set 2-22 Indicates Typeface supports the specified Symbol SetIndicates Typeface does not support the specified Symbol Set ITC Bookman Light ITC Bookman Light Italic ITC Bookman DemiIndicates Typeface supports the specified Symbol Set 2-23Indicates Typeface does not support the specified Symbol Set 2-24 Table 2-7 PCL Emulation Symbol Sets - Specials2-25 Table 2-7 PCL Emulation Symbol Sets Continued - Specials2-26 Table 2-7 PCL Emulation Symbol Sets Continued - Specials2-27 Table 2-7 PCL Emulation Symbol Sets Continued - Specials2-28 Table 2-7 PCL Emulation Symbol Sets Continued - SpecialsIndicates Typeface supports the specified Symbol Set Indicates Typeface does not support the specified Symbol SetTable 2-7 PCL Emulation Symbol Sets Continued - Specials 2-29Table 2-8 ISO PCL Emulation Symbol Sets 2-30 Table 2-8 ISO PCL Emulation Symbol Sets ContinuedCommand Structure Commands2-31 Control CodesCommand Structure Command Parameters2-32 Table 2-10 Description of Command StructureLinking Commands 2-33PCL Emulation Commands PCL Emulation Commands by Function2-34 Table 2-11 Job Control2-35 Table 2-11 Job Control ContinuedUnit of Measure Universal Exit Language UEL / Start of PJL2-36 Table 2-12 Page ControlSet Page Size Paper2-37 Table 2-12 Page Control ContinuedSet Universal Feed Direction Set Universal Custom Name2-38 Table 2-12 Page Control ContinuedSet Text Length Set Output Bin2-39 Table 2-12 Page Control ContinuedSet Line Spacing Alternative Method Duplex Page Side Selection2-40 Table 2-13 Alphanumeric IDTable 2-14 Cursor Positioning Alphanumeric ID2-41 Table 2-14 Cursor Positioning ContinuedVertical Cursor Position in Rows Vertical Cursor Position in Decipoints2-42 Select Symbol SetTable 2-15 Font Selection Select Spacing2-43 Select Stroke WeightSelect Default Font Select Underline Type Enable2-44 Table 2-16 User-Defined Symbol SetSymbol Set ID Code Define Symbol Set2-45 Table 2-17 Font CreationTable 2-18 Macros Set Font ID2-46 Pixel PlacementTable 2-19 Print Model Area Fill ID2-47 Table 2-20 User-Defined PatternTable 2-21 Rectangular Area Fill Graphics User-Defined Pattern2-48 Table 2-21 Rectangular Area Fill Graphics ContinuedArea Fill ID Gray Scale Fills2-49 Raster ResolutionTable 2-22 Raster Graphics Raster Graphics Presentation2-50 Table 2-22 Raster Graphics ContinuedSet Raster Compression Mode Transfer Raster Data by Row/Block2-51 Set Raster ConfigurationTable 2-22 Raster Graphics Continued Raster Height Destination2-52 Driver Configuration CommandTable 2-23 Color Extensions Monochrome Print Mode2-53 Configure Image DataTable 2-23 Color Extensions Continued Gamma Correction2-54 Table 2-24 Status ReadbackSet Status Readback Location Type Set Status Readback Location Unit2-55 Table 2-26 Miscellaneous CommandsTable 2-25 Picture Frame Picture Frame Horizontal Size in DecipointsGL/2 Commands 2-56Table 2-26 Miscellaneous Commands Continued Table 2-27 Configuration Group2-57 Table 2-27 Configuration Group ContinuedTable 2-28 Vector Group Table 2-29 Polygon GroupTable 2-29 Polygon Group Continued 2-58Table 2-30 Character Group 2-59 Table 2-31 Line and Fill Attributes GroupCR red black ref, red white ref, green black ref, green white ref blue black ref, blue white ref2-60 Raster Image GraphicsRaster Compression Mode SyntaxUncoded Data 2-61Example 2-62 Run-Length Encoded DataTagged Image File Format ExampleDelta Row 2-63Example 2-64 Adaptive CompressionTable 2-32 Adaptive Compression Control Strings ExampleZlib 2-65Group 3 and Group 4 Raster Compression 2-66 Additional Compression Modes2-67 MacrosExample ESC 8UCHAPTER 3 Printer Job Language PJL Command NotationTable 3-1 PJL Command Notation UNIVERSAL EXIT LANGUAGE Command Kernel CommandsSyntax ENTER LANGUAGE Command COMMENT CommandSyntax ExampleJOB Command Job Separation CommandsSyntax PASSWORD = number ParametersNAME = job name START = first pageSyntax EOJ CommandParameter Environment Commands and Variables Table 3-2 Environment Variable CategoriesSyntax DEFAULT Commandflash, flash1, disk, or disk1 case insensitive SET Command SyntaxA unique identifier for a file, such as the macro ID for a PCL 3-10for a PCL font, and so on. The filename is case sensitive INITIALIZE Command RESET Command3-11 SyntaxCommon Variables for Both Printer Languages 3-12Table 3-3 Common Variables for Both Printer Languages 3-13 Table 3-3 Common Variables for Both Printer Languages Continuedidentifier exists in this field, the printer writes a random alphanumeric string into this field whenever the critical3-14 Table 3-3 Common Variables for Both Printer Languages ContinuedTable 3-3 Common Variables for Both Printer Languages Continued 3-15the same print job in two separate groups in an output 3-16 Output Bin settingTable 3-3 Common Variables for Both Printer Languages Continued DINQUIRE orthe printer language whose SmartSwitch setting is ON 3-17Table 3-3 Common Variables for Both Printer Languages Continued 3-18 a SET or DEFAULT command, the value is changed toTable 3-3 Common Variables for Both Printer Languages Continued If Collation - Collated Copies QTY is not equal to 0, a3-19 Printer Unique Variables for Both Printer LanguagesTable 3-3 Common Variables for Both Printer Languages Continued Table 3-4 Printer Unique Variables for Both Printer Languages3-20 Bond settingAssign Type/Bin DINQUIRE or3-21 Card Stock settingAssign Type/Bin DINQUIRE or3-22 settingAssign Type/Bin DINQUIRE orWhen queried, the quotes are not returned around the 3-23string name. The default name is returned unless you 3-24 settingAssign Type/Bin DINQUIRE or3-25 settingAssign Type/Bin DINQUIRE or3-26 settingAssign Type/Bin DINQUIRE or3-27 settingAssign Type/Bin DINQUIRE or3-28 settingAssign Type/Bin DINQUIRE or3-29 settingAssign Type/Bin DINQUIRE or3-30 Envelope settingAssign Type/Bin DINQUIRE or3-31 variable. For more information, see “Status Readback3-32 Glossy settingAssign Type/Bin DINQUIRE or3-33 Factory DefaultVariable Function3-34 Labels settingAssign Type/Bin DINQUIRE or3-35 Letterhead settingAssign Type/Bin DINQUIRE or3-36 Factory DefaultVariable Function3-37 Factory DefaultVariable Function3-38 Factory DefaultVariable Function3-39 settingOverflow Bin DINQUIRE or3-40 Plain settingAssign Type/Bin DINQUIRE ordisable PPDS printer language. After this command is 3-41specified, the printer defaults to the closest number in 3-42 settingAssign Type/Bin DINQUIRE or3-43 Factory DefaultVariable Function3-44 Factory DefaultVariable Function3-45 Factory DefaultTransparency setting INQUIRE value Variable3-46 name is a text string that is truncated to 24 characters3-47 Factory DefaultVariable FunctionCommon Variables for PCL Emulation 3-48Table 3-5 Common Variables for PCL Emulation Printer Unique Variables for PCL Emulation 3-49Table 3-6 Printer Unique Variables for PCL Emulation 3-50 Table 3-6 Printer Unique Variables for PCL Emulation Continued3-51 Common Variables for PostScript Emulation@PJL SET LPARMPOSTSCRIPT JAMRECOVERY=OFFCRLF Table 3-6 Printer Unique Variables for PCL Emulation Continued3-52 Printer Unique Variables for PostScript EmulationPrinter Unique LRESOURCE Variables Table 3-8 Printer Unique Variables for PostScript Emulation3-53 Table 3-9 Printer Unique LRESOURCE VariablesStatus Readback Commands DINQUIRE Command3-54 SyntaxECHO Command 3-55Syntax Response SyntaxINFO Command 3-56Syntax Response Syntax3-57 INFO CONFIG Response Syntax An ExampleINQUIRE Command 3-58Syntax Response SyntaxUSTATUS Command 3-59Syntax Response SyntaxUSTATUSOFF Command 3-60Table 3-11 USTATUS Unsolicited Status Variable Values Syntax3-61 Status Message FormatInformation Messages Table 3-12 PJL Information Messages3-62 Table 3-12 PJL Information Messages11xyy 12xyyAuto-Continuable Conditions 3-63Table 3-13 PJL Messages for Auto-Continuable Conditions 3-64 Table 3-13 PJL Messages for Auto-Continuable Conditions Continued3-65 Table 3-13 PJL Messages for Auto-Continuable Conditions Continued3-66 Table 3-13 PJL Messages for Auto-Continuable Conditions ContinuedAttendance Conditions 3-67Table 3-14 PJL Message for Attendance Conditions Table 3-14 PJL Message for Attendance Conditions 3-68Cartridge Life Warning 3-69 Table 3-14 PJL Message for Attendance ConditionsTable 3-14 PJL Message for Attendance Conditions 3-70PerfectFinish Missing 3-71 Table 3-14 PJL Message for Attendance ConditionsOperator Intervention - Paper Handling 3-72Table 3-14 PJL Message for Attendance Conditions 3-73 Table 3-15 PJL Messages for Paper Handling41xyy 41xyy3-74 Table 3-16 Tray CodesTable 3-17 Media Size Codes X Value3-75 Operator Intervention - Paper JamsTable 3-17 Media Size Codes Table 3-18 Output Bin CodesTable 3-19 PJL Messages for Paper Jams 3-76y represents the tray number. z represents the bin number Table 3-19 PJL Messages for Paper Jams Continued 3-77y represents the tray number. z represents the bin number Table 3-19 PJL Messages for Paper Jams Continued 3-78y represents the tray number. z represents the bin number Table 3-19 PJL Messages for Paper Jams Continued 3-79y represents the tray number. z represents the bin number Device Attendance Commands Service ErrorsRDYMSG Command 3-80OPMSG Command STMSG Command3-81 SyntaxUnique PJL Commands LBEEP CommandLPORTROTATE Command 3-82LPRINT Commands Information Pages LESCAPECHAR Command3-83 Table 3-20 LPRINT testpage Commands3-84 PORT parameterThe following ports are valid parameters for LESCAPECHAR INA INA1 INA2 INA3 LOCALTALK1 LOCALTALK2 LOCALTALK3 PARALLEL PARALLEL1LFAX PHONENUMBER Command 3-85Syntax Table 3-21 LFAX PHONENUMBER “number” ValuesLDOWNLOADTARGET Command File Commands for Flash or Disk3-86 Syntax3-87 Table 3-22 Variables for Flash and Disk File and Password Commandsaccesstype ACCESS = accesstype3-88 symbol set IDfiledevice DEVICE = filedeviceLOPENFILE Command LCLOSEFILE Command3-89 SyntaxLREADFILE Command 3-90Syntax Response SyntaxLWRITEFILE Command LRUNFILE Command3-91 SyntaxLRENAMEFILE Command LDELETEFILE CommandLFORMAT Command LDEFRAG CommandFile and Device Protection Commands Password Protection for a File3-93 Protecting a File or DevicePassword for an Entire Device 3-94@PJL DEFAULT LRESOURCEflash00127000.p5bitmap LWLOCK=passwordCRLF @PJL DEFAULT LRESOURCEflash1023.p5macro LRWLOCK=passwordCRLFUnlocking a Protected File or Device 3-95Syntax 3-96 Re-Locking a Protected File or Device@PJL LDELETEPASSWORD LRESOURCE devicefilename.filetypeCRLF SyntaxUnlocking a Protected File or Device for the Current Job 3-97Syntax 3-98 Recovering Lost PasswordsSyntax CHAPTER 4 PostScript Emulation Selecting PostScript EmulationPostScript Using SmartSwitchUsing Your Software Program PostScriptTable 4-1 Paper Sizes Supported Paper Sizescurrentuniversalsize ignoresizesetignoresize Error stackoverflowPaper Tray Support setuniversalsizeError rangecheck, stackunderflow, typecheck PostScriptPostScript Tray Tray Tray Multipurpose Feeder Tray TrayTable 4-2 Tray Selected with Tray Operators PostScriptNot Supported manualfeed papertrayError stackoverflow Error stackoverflowsetpapertray Errors rangecheck, stackunderflow, typecheckPostScript integer setpapertrayPostScript Envelope Size SupportTable 4-3 Envelope Sizes Supported PostScript 4-10Table 4-4 Literal Names Supported 4-11 Envelope Tray SupportPostScript PageSize x y /ImagingBBox null /Policies/PageSize 0 setpagedevice4-12 PostScriptTable 4-5 Envelopetray Operator Selections Supported4-13 Supplemental Operator Summaryappletalktype buildtimecheckpassword 4-14currentfilenameextend currentmanualduplexmodedefaulttimeouts 4-15deletefile Error stackoverflow4-16 devcontrolPostScript Table 4-6 devcontrol Operator Parameters4-17 devdismountTable 4-7 Unsuccessful devcontrol Parameter Error Codes Errors invalidaccess, rangecheck, typecheck4-18 devforalldevformat PostScript4-19 devmountdevstatus Errors invalidaccess, stackunderflow, undefinedfilename4-20 diskonlineError typecheck Error stackoverflow4-21 diskstatusdisplayoperatormsg doidlefontsdojamrecovery doprinterrors4-22 doret4-23 dostartpagedosysstart duplexer4-24 duplexmodeenginesync Error stackoverflow4-25 filefilenameforall fileposition4-26 firstsidefontnonzerowinding hardwareiomode4-27 initializediskjobname Errors invalidaccess, ioerror, rangecheck, stackunderflow, typecheckjobsource 4-28PostScript jobtimeout 4-29Error stackoverflow Error stackoverflowmanualfeedtimeout 4-30newsheet pagecount4-31 pagesprintedprintername product4-32 PS2fontsPS3fonts quiet4-33 ramsizerealformat renamefileresolution 4-34revision Error stackoverflow4-35 sccbatchErrors rangecheck, stackoverflow, stackunderflow, typecheck PostScriptsetdefaulttimeouts 4-36sccinteractive setcoverpagesetdojamrecovery setdoprinterrors4-37 setdoidlefonts4-38 setdoretsetdostartpage Errors rangecheck, stackunderflow, typecheck4-39 setdosysstartsetduplexmode Errors invalidaccess, stackunderflow, typecheck4-40 setenginesyncsetethernetaddress setfilenameextend4-41 setfilepositionsethardwareiomode setidlefontssetjobtimeout 4-42setmanualduplexmode Errors rangecheck, stackunderflow, typecheck4-43 setprinternamesetquiet Errors invalidaccess, limitcheck, stackunderflow, typechecksetresolution 4-44setsccbatch Errors rangecheck, stackunderflow, typecheck4-45 setsccinteractivesetsoftwareiomode settumble4-46 setuserdiskpercentsoftwareiomode tumblewaittimeout 4-47userdiskpercent Errors stackoverflow, invalidaccess4-48 Page Device ParametersPostScript Table 4-8 Page Device ParametersPostScript 4-49Table 4-8 Page Device Parameters Continued 4-50 If A4 is requested but not installed and Letter is installed, LetterPostScript Table 4-8 Page Device Parameters Continued4-51 Jam Recovery is set to OnPostScript Table 4-8 Page Device Parameters Continued4-52 PostScriptTable 4-8 Page Device Parameters Continued Source4-53 PostScriptTable 4-8 Page Device Parameters Continued determines the mapping of the physical input sources to the input sources listed4-54 0 infinite wait or no timeoutPostScript Table 4-8 Page Device Parameters Continued4-55 PostScriptTable 4-8 Page Device Parameters Continued Rows4-56 PostScriptTable 4-8 Page Device Parameters Continued Orientation is assumed to be Landscape regardless of the4-57 PostScriptTable 4-8 Page Device Parameters Continued setpagedevice operator4-58 the DefaultPageSizePolicy key in the DeviceRenderingInfoDefaultPageSizePolicy key in the DeviceRenderingInfo 0 Generate a configurationerror4-59 PostScriptTable 4-8 Page Device Parameters Continued Punch n setpagedevice4-60 PostScriptTable 4-8 Page Device Parameters Continued SlipSheetDetails /Type4-61 PostScriptTable 4-8 Page Device Parameters Continued Causes pages to print as if they are to be side bound as in a book4-62 Interpreter ParametersUser Parameters PostScript4-63 PostScriptTable 4-9 PostScript Emulation User Parameters Continued setcolorscreen, and sethalftone are not affectedPostScript 4-64Table 4-9 PostScript Emulation User Parameters Continued 4-65 System ParametersPostScript Table 4-10 PostScript Emulation System Parameters4-66 PostScriptTable 4-10 PostScript Emulation System Parameters Continued the same as CurInputDevice4-67 Note When a job changes this parameter from False to TruePostScript Table 4-10 PostScript Emulation System Parameters Continued4-68 InstalledRamPostScript Table 4-10 PostScript Emulation System Parameters Continued4-69 Read-only Total amount of memory in bytes installed in thePostScript Table 4-10 PostScript Emulation System Parameters Continued4-70 Negative values are ignored and the previous setting is usedPostScript Table 4-10 PostScript Emulation System Parameters ContinuedDevice Parameters 4-71PostScript 4-72 PCL SmartSwitch is set to OnPCL SmartSwitch is set to Off PostScript4-73 PS SmartSwitch is set to OnPS SmartSwitch is set to Off PostScript4-74 PCL SmartSwitch is set to OnPCL SmartSwitch is set to Off PS SmartSwitch is set to OnPostScript 4-75Table 4-11 PostScript Emulation Device Parameters Continued PostScript 4-76Table 4-11 PostScript Emulation Device Parameters Continued PostScript 4-77Table 4-11 PostScript Emulation Device Parameters Continued PostScript 4-78Table 4-11 PostScript Emulation Device Parameters Continued PostScript 4-79Table 4-11 PostScript Emulation Device Parameters Continued PostScript 4-80Table 4-11 PostScript Emulation Device Parameters Continued PostScript 4-81Table 4-11 PostScript Emulation Device Parameters Continued PostScript 4-82Table 4-11 PostScript Emulation Device Parameters Continued PostScript 4-83Table 4-11 PostScript Emulation Device Parameters Continued 4-84 PostScriptTable 4-11 PostScript Emulation Device Parameters Continued Device Parameters for the Communication Device %LPR%, %LPRA%, %LPRB%, %LPRC%, %LPRD% %LPRNV% and %LPRPending% contain the same parametersPostScript 4-85Table 4-11 PostScript Emulation Device Parameters Continued 4-86 PostScriptTable 4-11 PostScript Emulation Device Parameters Continued Device Parameters for the Parameters Device %Engine%4-87 Print Darkness and Toner Saver SettingSetting Setting Value4-88 PostScriptTable 4-11 PostScript Emulation Device Parameters Continued Device Parameters for the Parameters Device %Console%4-89 PostScriptTable 4-11 PostScript Emulation Device Parameters Continued LogicalSize4-90 Read-only Indicates if the flash parameter is only valid when flash is mounted mounted isPostScript Table 4-11 PostScript Emulation Device Parameters Continued4-91 PostScriptTable 4-11 PostScript Emulation Device Parameters Continued Device Parameters for the IODevice %rom%Status and Error Messages 4-92Tagged Binary Not Active Tagged Binary Active4-93 Status MessagesPostScript Table 4-12 Status Message Keys and Value DescriptionsSmartSwitch CHAPTER 5 Switching LanguagesLanguages Printer Job Language Setting SmartSwitch for Different InterfacesLanguages Sniffing LanguagesCHAPTER 6 Flash Memory and Disk MemoryResource Data Collection Download Target MemoryStoring Resources on Flash Memory or Disk Viewing the Contents of Flash Memory and DiskMemory Example of Directory Optional Font MemoryPart Name MemoryPart Number Write Password ProtectedMemory Type SizeProt MemoryDescription Password ProtectionMemory Rewriting the Flash Content MemoryAccessing Files with PostScript Emulation File Naming ConventionsDevice Names Memory6-10 FilenamesFilename Extensions Memory6-11 To add the .data extension automatically again, issueMemory disk%myfont.type1 deletefile6-12 Device Search OrderMemory initializedisk devformat6-13 PerformanceJob Buffering Memory6-14 Creating a PartitionEnabling Job Buffering MemoryRecovering from a Power Loss 6-15Disabling Job Buffering MemoryCHAPTER 7 Printer Specifications SpecificationsAirflow Requirement Noise Emission LevelsElectrical Specifications Power RequirementsSpecifications Table 7-2 Printer Electrical SpecificationsClearance Requirements Physical SpecificationsSpecifications Altitude Specifications Environmental ConditionsAtmospheric Pressure SpecificationsCHAPTER 8 Printer Interfaces InterfacesSetting Up the Communications Port Setting Up the Communications Port Using Windows 95/98/Me2 Click Settings Interfaces2 Click Settings Setting Up the Communications Port Using Windows NTInterfaces 2 Click Settings Setting Up the Communications Port Using WindowsInterfaces Setting Up the Communications Port Using Windows XP InterfacesDeciding Which Interface to Use InterfacesParallel Interface Computer to PrinterPrinter to Computer Advanced Status Parallel Modes 1 andStandard Parallel Connector Using the INIT* Signal to InitializeComputer-to-Printer Communications InterfacesInterfaces Standard Parallel ConnectorIEEE 1284-B IEEE 1284-A 8-10 Interfaces8-11 Standard Protocol Data Transfer SequenceInterfaces DATA1-8 A B C8-12 Fastbytes Protocol Data Transfer SequenceInterfaces Table 8-1 Typical Parallel Interface Timings8-13 Printer-to-Computer Communication Advanced StatusInterfaces Table 8-2 Fastbytes Timing SequenceParallel Mode 8-14Interfaces Signal Descriptions 8-15STROBE Receiver for the Lexmark T640x InterfacesDATA 1-8 Signal Driver/Receivers for the Lexmark T640x 8-16AUTOFD* Receiver for the Lexmark T640x InterfacesACKNLG*, ERROR*, SLCT, PE Drivers for the Lexmark T640x 8-17BUSY Driver and INIT* Receiver for the Lexmark T640x ConnectorUsing the RS-232C Serial Interface 8-18SLCTIN* Receiver for the Lexmark T640x Serial InterfaceHow to Connect the RS-232C Serial Interface 8-19RS-232C Serial Cable Pin Assignments Table 8-3 Dedicated Serial Connector Pin Assignments RS-232CInterfaces 8-20Lexmark 1038693 50 ft 8-21 Serial Communication Parameters RS-232CVoltage Level Range Serial Data Frame Considerations RS-232C8-22 Start and Stop BitsParity InterfacesData Flow Control 8-23Interfaces 8-24 Protocol RS-232CInterfaces Table 8-4 Serial Link All Protocols with Honor DSR On8-25 DTR and DTR/DSR Protocol Timing RS-232CBuffer full Attendance error Printer not in ready state The following diagram illustrates DTR Protocol TimingXON/XOFF Protocol Timing RS-232C 8-26Interfaces Serial Errors Serial Computer Configuration Recommendations RS-232C8-27 Interfaces8-28 Network SupportRS-232C Port Compatibility Windows 95/98/Me/2000, Windows NT 4.0, and Windows XP8-29 Input BufferInterfaces Table 8-6 Input Buffer Sizes in BytesInterfaces 8-30Table 8-6 Input Buffer Sizes in Bytes Continued PCL Support APPENDIX A PCL SupportTable A-1 PCL Emulation Commands Table A-1 PCL Emulation Commands Continued PCL SupportSupported Not SupportedTable A-1 PCL Emulation Commands Continued PCL SupportSupported Not SupportedTable A-1 PCL Emulation Commands Continued PCL SupportSupported Not SupportedTable A-1 PCL Emulation Commands Continued PCL SupportSupported Not SupportedTable A-1 PCL Emulation Commands Continued Table A-2 GL/2 CommandsPage numbers reference command PCL SupportTable A-2 GL/2 Commands Continued Page numbers reference commandPCL Support SupportedTable A-2 GL/2 Commands Continued Page numbers reference commandPCL Support SupportedTable A-2 GL/2 Commands Continued Page numbers reference commandPCL Support SupportedPJL Support APPENDIX B PJL SupportTable B-1 Common Variables for Both Printer Languages PJL Support Table B-1 Common Variables for Both Printer Languages ContinuedSupported Not SupportedPJL Support Table B-1 Common Variables for Both Printer Languages ContinuedSupported Not SupportedPJL Support Table B-2 Printer Unique PJL Variables for Both Printer LanguagesSupported Not SupportedPJL Support SupportedNot Supported Page numbers reference variable descriptionsPJL Support SupportedNot Supported Page numbers reference variable descriptionsPJL Support SupportedNot Supported Page numbers reference variable descriptionsPJL Support SupportedNot Supported Page numbers reference variable descriptionsPJL Support SupportedNot Supported Page numbers reference variable descriptionsB-10 PJL SupportSupported Not SupportedB-11 PJL SupportTable B-3 Common Variables for PCL Emulation SupportedB-12 PJL SupportTable B-3 Common Variables for PCL Emulation Continued Table B-4 Printer Unique Variables for PCL EmulationB-13 PJL SupportTable B-5 Common Variables for PostScript Emulation Table B-6 Printer Unique Variables for PostScript EmulationB-14 Table B-8 Status Readback CommandsPage numbers reference command descriptions PJL SupportB-15 PJL SupportTable B-10 PJL Messages for Auto-Continuable Conditions SupportedB-16 PJL SupportTable B-10 PJL Messages for Auto-Continuable Conditions Continued SupportedB-17 PJL SupportTable B-10 PJL Messages for Auto-Continuable Conditions Continued SupportedB-18 PJL SupportTable B-10 PJL Messages for Auto-Continuable Conditions Continued SupportedB-19 PJL SupportTable B-10 PJL Messages for Auto-Continuable Conditions Continued Table B-11 PJL Messages for Attendance ConditionsB-20 PJL SupportTable B-11 PJL Messages for Attendance Conditions Continued SupportedB-21 PJL SupportTable B-11 PJL Messages for Attendance Conditions Continued SupportedB-22 PJL SupportTable B-11 PJL Messages for Attendance Conditions Continued SupportedB-23 PJL SupportTable B-11 PJL Messages for Attendance Conditions Continued SupportedB-24 PJL SupportTable B-11 PJL Messages for Attendance Conditions Continued SupportedB-25 PJL SupportTable B-12 PJL Messages for Paper Handling SupportedB-26 PJL SupportTable B-12 PJL Messages for Paper Handling Continued Table B-13 PJL Messages for Paper JamsB-27 PJL SupportTable B-13 PJL Messages for Paper Jams Continued SupportedB-28 PJL SupportTable B-13 PJL Messages for Paper Jams Continued SupportedB-29 PJL SupportTable B-13 PJL Messages for Paper Jams Continued SupportedB-30 PJL SupportTable B-13 PJL Messages for Paper Jams Continued SupportedB-31 Table B-14 Service ErrorsPJL Support Table B-13 PJL Messages for Paper Jams ContinuedB-32 Table B-16 Lexmark Unique PJL CommandsPage numbers reference command descriptions PJL SupportB-33 Table B-16 Lexmark Unique PJL Commands ContinuedTable B-17 File and Device Protection Commands Page numbers reference command descriptionsPostScript Support APPENDIX C PostScript SupportTable C-1 Supplemental Operators PostScript Support Table C-1 Supplemental Operators ContinuedSupported Not SupportedPostScript Support Table C-1 Supplemental Operators ContinuedSupported Not SupportedDefault values are listed PostScript SupportTable C-1 Supplemental Operators Continued Table C-2 Page Device ParametersDefault values are listed PostScript SupportTable C-2 Page Device Parameters Continued SupportedDefault values are listed PostScript SupportTable C-2 Page Device Parameters Continued SupportedDefault values are listed PostScript SupportTable C-2 Page Device Parameters Continued SupportedDefault values are listed PostScript SupportTable C-2 Page Device Parameters Continued Table C-3 User Interpreter ParametersDefault values are listed PostScript SupportTable C-3 User Interpreter Parameters Continued Table C-4 System Interpreter ParametersC-10 Default values are listedPostScript Support Table C-4 System Interpreter Parameters ContinuedC-11 Default values are listedPostScript Support Table C-4 System Interpreter Parameters ContinuedC-12 PostScript SupportTable C-5 Devices Supported SupportedC-13 PostScript SupportTable C-5 Devices Supported Continued SupportedC-14 PostScript SupportTable C-6 Device Parameters SupportedC-15 PostScript SupportTable C-6 Device Parameters Continued SupportedC-16 PostScript SupportTable C-6 Device Parameters Continued SupportedC-17 PostScript SupportTable C-6 Device Parameters Continued SupportedC-18 PostScript SupportTable C-6 Device Parameters Continued SupportedC-19 PostScript SupportTable C-6 Device Parameters Continued SupportedC-20 PostScript SupportTable C-6 Device Parameters Continued SupportedC-21 PostScript SupportTable C-6 Device Parameters Continued SupportedC-22 PostScript SupportTable C-6 Device Parameters Continued SupportedC-23 Table C-7 PostScript Commands Message KeysPostScript Support Table C-6 Device Parameters ContinuedIndex IndexIndex Index commands alphabetic 2-34 alphanumeric ID 2-40 color extensions Indexvertical rectangle size decipoints Indexvertical rectangle size PCL Units Index system parameters 4-65 user parameters 4-62 using the operator panel IndexIndex 34 Incorrect Media 34 Wrong Paper Size in Tray xIndex X-10 IndexX-11 IndexIndex X-12LIMAGEORIENTATION X-13 IndexX-14 IndexX-15 Index