Lexmark C762, C760 manual MAC5

3-88 PJL

Table 3-22: Variables for Flash and Disk File and Password Commands (Continued)

Parameter	Syntax	Description
filedevice	DEVICE = filedevice	File storage media. Case insensitive.
		flash
		flash1
		disk
		disk1
		rom
		The rom value is used for the LRUNFILE command only.
		Note: The command is ignored if the device is not installed.
flashdevice	DEVICE = flashdevice	File storage media.
		flash
		flash1
filename	FILENAME = "fname"	“Fname” is comprised of a filename, a unique identifier for a file, and a
	OLDFILENAME = "fname"	filetype, which specifies the type of file. The format is
	NEWFILENAME = "fname" filename.filetype.
		The filename must be one of the following:
		macro ID	PCL macros
		symbol set ID	PCL symbol sets
		font ID	PCL fonts
		actual filename	data, Type 1 fonts, demo files
			(case sensitive)

The filetype must be one of the following:

t1	PostScript font
sFnt5	PCL scalable font
bFnt5	PCL bitmap font
MAC5	PCL macro
data	User Data
type1	PostScript font
demo	Demo
p5scalable	PCL scalable font
p5bitmap	PCL bitmap font
p5macro	PCL macro
p5symset	PCL symbol set
ppdsbm	PPDS bitmap font
xlmacro	PCL XL user stream

All fname specifications must be enclosed in quotation marks and cannot exceed 127 characters.

If the file is password-protected, the password must be provided in order to unlock the file.

For additional information about passwords, see “File and Device Protection

Commands” on page 3-93.