Lexmark C762, C760 4-68, 10 PostScript Emulation System Parameters Continued, InstalledRam

4-68

PostScript

Table 4-10: PostScript Emulation System Parameters (Continued)

Key	Type	Definition
InstalledRam	integer	(Read-only) Indicated, in bytes, the total amount of installed
		printer memory (RAM) in the system.
		Note: InstalledRam should not be confused with RamSize
		which is the amount of memory (RAM) available to the
		formatting interpreters and the graphics engine.
JobTimeout	integer	The value in seconds to which the user parameter
		JobTimeout is initialized at the beginning of each print job. If
		you set the system parameter JobTimeout to a negative
		value, it is ignored and the previous setting of JobTimeout is
		used. A value of 0 (zero) indicates that the timeout is infinite.
		If you set a number between 1 and 14, 15 is set.
		Legal values: x = 0, 15 <= x <= 65355
languagelevel	integer	The value of languagelevel integer in systemdict always
		matches the value of this system parameter. If set to 2, the
		printer will behave as though /UseOldcopypage and
		/UseOldfonts are both true (regardless of their actual values).
		The latter two parameters will return their actual values when
		queried.
		Legal Values: 2, 3
MaxDisplayAndSourceList2	integer	(Read-only) This value is always the same value as
		InstalledRam.
MaxDisplayList	integer	(Read-only) See Table C-4 on page C-9for the default value
		of your printer.
MaxFontCache	integer	(Read-only) See Table C-4 on page C-9for the default value
		of your printer.
MaxFormCache	integer	Maximum bytes occupied by the form cache.
		Legal value: Any non-negative integer.
MaxImageBuffer	integer	(Read-only) See Table C-4 on page C-9for the default value
		of your printer.
MaxOutlineCache	integer	(Read-only) See Table C-4 on page C-9for the default value
		of your printer.
MaxPatternCache	integer	Maximum bytes occupied by the pattern cache.
		Legal value: Any non-negative integer.
MaxPermanentVM2	integer	(Read-only) See Table C-4 on page C-9for the default value
		of your printer.
MaxRasterMemory	integer	(Read-only) See Table C-4 on page C-9for the default value
		of your printer.
MaxScreenStorage	integer	(Read-only) See Table C-4 on page C-9for the default value
		of your printer.

1 These parameters are Lexmark-specific and are in addition to the Adobe PostScript Language Supplement 2016. 2 These parameters are available with the Adobe PostScript Language Supplement 3010.

3 These parameters are Lexmark-specific and are in addition to the Adobe PostScript Language Supplement 3010.