Lexmark C762, C760 manual 2-43, 15 Font Selection Continued, Select Stroke Weight, Select Typeface

2-43 PCL

Table 2-15: Font Selection (Continued)

Command / Parameters		Function / Result
ESC(s#B (primary)		Select Stroke Weight
ESC)s#B (secondary)		Selects a font with a particular thickness.
-7	Ultra Thin	Note: This command will not alter the stroke weight of an available font.
-6	Extra Thin
-5	Thin
-4	Extra Light
-3	Light
-2	Demi Light
-1	Semi Light
0	Medium (Default)
1	Semi Bold
2	Demi Bold
3	Bold
4	Extra Bold
5	Black
6	Extra Black
7	Ultra Black
ESC(s#T (primary)		Select Typeface
ESC)s#T (secondary)		Selects the best fit font design.
# Typeface identifier (0 - 65535)		To obtain the typeface values for downloaded fonts, print the font list from
		the printer operator panel or through MarkVision Professional. See your
Note: For a list of typeface numbers, see		printer documentation for more information.
Table 2-2 on page 2-9and “Font and Symbol		On the printout, the typeface number is the last number on the font
Set Support for the Lexmark C760 and C762”
		selection command example line. The example line is below the name of
on page 2-7.
		the font. In the following example, the typeface number is underlined:
		RO Courier
		<<ESC>>(<<symset>><<ESC>>(s0p<<pitch>>h0s0b4099T
ESC(#X (primary)		Select Font by Font ID
ESC)#X (secondary)		Selects the font by the identification number.
# = Font ID (0 - 32767)
ESC(3@ (primary)		Select Default Font
ESC)3@ (secondary)		Sets all font selection characteristics to the Default Font.
ESC&p#X[data]		Transparent Print Data
# = number of data of bytes to print as text		Prints the next number of bytes as text.
ESC&d#D		Select Underline Type (Enable)
0,1	Fixed	Notes:
2	Fixed - double	• Fixed underline is drawn 5 pels below cursor position.
3	Floating	• Floating underline position is determined by all the positions of the
4	Floating - double	characters with descenders in the fonts that are to be underlined.
		• Underline thickness is 1/100 inch.
ESC&d@		Underline - Disable