Lexmark C760, C762 manual Status Readback

2-54 PCL

Table 2-24: Status Readback

Command / Parameters		Function / Result
ESC*s#T		Set Status Readback Location Type
0	Invalid location (Default)	Sets the status location type to the specified value.
1	Use currently selected location	The 5 value for Cartridge may be specified, but since your printer
2	All locations
		does not support font cards or cartridges, the command is ignored.
3	Internal (resident)
		The 7 value for User-installable flash is only valid when flash
4	Downloaded entity
5	Cartridge	memory is installed.
7	User-installable flash	The 200 value is only valid when a hard disk is installed.
200	Disk
ESC*s#U		Set Status Readback Location Unit
0	All	Sets the status location unit to the specified value.
1	If download, temporary; otherwise,	The location unit is used along with the location type to identify a
	highest priority
		location for the Inquire Status Readback Entity command.
2	If download, permanent; otherwise,
		Note: The unit value is interpreted differently, depending on the
	next higher priority
		location type specified.
ESC*s#I		Inquire Status Readback Entity
0	Font	Returns the requested information set by Set Status Readback
1	Macro	Location Type and Set Status Readback Location Unit.
2	User-defined pattern
3	Symbol set (for unbound scalable
	fonts)
4	Font extended
ESC*s1M		Free Space
		Returns the total available memory and the largest available block
		of memory.
ESC&r#F		Flush All Pages
0	Flush all complete pages	Holds print jobs in the print buffer until the current job finishes
1	Flush all pages	printing.
ESC*s#X		Echo
-32767 to 32767		Returns # back to host computer.
Default = 0