Lexmark C762, C760 manual Common Variables for PCL Emulation

[command modifier:value]

3-48 PJL

Common Variables for PCL Emulation

Note: The word common applies to those variables common to both your printer and the Hewlett-Packard Company’s LaserJet printers.

Use these variables only for PCL emulation. The parameter should be specified as LPARM:PCL. For example:

@PJL SET LPARM:PCL FONTSOURCE=I<CR><LF>

To determine which variables your printer supports, see “Table B-3: Common

Variables for PCL Emulation” on page B-11.

Table 3-5: Common Variables for PCL Emulation

Variable	Function	Selections		Factory Default
FONTNUMBER	Font Number	0, 1, .... n		0
FONTSOURCE	Font Source	I, S, M1, M2, M3, M4, D1		I
		I	Internal font source
		S	Permanent download fonts
		M1, M2,
		M3, M4	Flash font source
		D1	Disk font source
		All other values default to internal font source.
PITCH	Default pitch	0.08 to 100 (in increments of 0.01)		10.00
	(fixed-pitch fonts)	Note: If an invalid pitch is requested, the printer
		selects the closest pitch.
PTSIZE	Default point size	1 to 1008 (in increments of 0.25)		12.00
	(proportional spaced	Note: If an invalid point size is requested, the
	fonts)	printer selects the closest point size.
SYMSET	Symbol set for the	If a symbol set is requested that is not resident		PC8, PC850
	default font	in the printer, the symbol set is not changed.		(Country specific)