Lexmark C762, C760 manual HasNames Boolean

4-90

PostScript

Table 4-11: PostScript Emulation Device Parameters (Continued)

Key	Type	Definition
HasNames	boolean	(Read-only) Indicates if the flash parameter is only valid when flash is mounted (mounted is
		set to True). If flash is not mounted, the parameter has a value of False.
InitializeAction	integer	Specifies an action for initializing flash:
		0	Indicates no action; the value is returned when the parameter is read.
		1	Indicates that the current file system should be deleted and a new one of
			PhysicalSize created (the flash must be formatted already). The flash must
			first be mounted; otherwise, an ioerror results.
		2	Reformats the entire flash before creating a new file system of PhysicalSize
		3	(or greater) has the same effect as the value 2 and also tests the flash x — 2
			times
		Legal value: Any non-negative integer.
LogicalSize	integer	This parameter is not used for InitializeAction.
		InitializeAction always formats to PhysicalSize, regardless of what is specified in
		LogicalSize. A query returns the current size (in pages) of the file system on the device.
		A value of 0 (zero) indicates that the device is not mounted.
		Legal value: Any non-negative integer, including 0 (zero).
		The value of LogicalSize must be less than or equal to the value of PhysicalSize. A
		rangecheck error occurs if you try to set a larger value or set the value to 0 (zero).
Mounted	boolean	True	System attempts to mount the flash.
		False	System attempts to dismount the flash.
		When a device is mounted, it becomes known to the system and is readable, depending on
		the nature of the device.
		A device must contain a valid file system or it will not mount successfully. To verify if the
		device is currently mounted, query this parameter immediately after setting it.
PhysicalSize	integer	(Read-only) Indicates the size of the flash (in pages) for a flash that is mounted. A value of 0
		indicates that the device is not mounted.
Removable	boolean	(Read-only) Indicates if the drive supports removable flash.
Searchable	boolean	(Read-only) Indicates if the flash participates in searches in file system operations that
		specify a filename without specifying a device.
SearchOrder	integer	(Read-only) If the Searchable parameter is True, indicates the priority at which the flash is
		searched for a file in operations where no device has been specified. A lower integer
		indicates a high priority. If the Searchable parameter is False, the value of this integer has
		no meaning.
Type	name	(Read-only) This constant always returns the value of /FileSystem.
Writeable	boolean	(Read-only) Indicates if the files on the flash can be opened for write access. A write-
		protected flash returns False. When the flash is not mounted, this parameter indicates if the
		device supports writeable media.