Lexmark C760, C762 manual 4-69, 10 PostScript Emulation System Parameters Continued

4-69

PostScript

Table 4-10: PostScript Emulation System Parameters (Continued)

Key	Type	Definition
MaxSourceList	integer	(Read-only) See Table C-4 on page C-9for the default value
		of your printer.
MaxUPathCache	integer	Maximum bytes occupied by the user path cache.
		Legal value: Any non-negative integer.
PageCount	integer	(Read-only) Total number of pages that have been printed.
PanelCode1	string	(Read-only) Version of the operator panel code.
PrinterCode1	string	(Read-only) Firmware version of the printer controller card.
PrinterName	string	Initialized from the printer name stored in NVRAM (the default
		name of the printer). If this parameter is set to a zero length
		string, the PrinterName is set to the value of the product
		string in statusdict.
		Legal value: Any string of 32 or fewer non-null characters.
RamSize	integer	(Read-only) Total amount of memory (in bytes) installed in the
		printer.
RealFormat	string	(Read-only) Preferred representation for real numbers in
		binary encoded tokens.
Revision	integer	(Read-only) The current revision level of the machine-
		dependent portion of PostScript emulation.
SearchBuiltinFontsFirst1	boolean	Controls the device search order the interpreter uses to
		locate fonts.
SerialNumber1	string	(Read-only) Serial number of your printer.
StartJobPassword	string	(Write-only) Controls the ability of the startjob operator to
		alter initial Virtual Memory (VM).
		Legal value: Any integer or string of 32 or fewer non-null
		characters. An integer is converted to a string.
StartupMode	integer	Controls the system start file (Sys/Start) during PostScript
		emulation initialization. Also, controls the job start file (Job/
		Start) before each print job.
		0	Disable use of Sys/Start file and Job/Start file.
		1	Sys/Start file executes (if present on disk or flash).
		10 Job/Start file executes before each user job.
		11 Both files run (a combination of 1 and 10).
		Legal Values: 0 <= x <= 255. Values other than the four listed
		are equivalent to 0.
		Note: If both flash and disk have a Sys/Start file and Job/Start
		file, the value of the SearchOrder for the two devices
		determines which file is executed.
StaticRamSize1	integer	(Read-only) Amount of static memory (in bytes) on the
		controller board.

1 These parameters are Lexmark-specific and are in addition to the Adobe PostScript Language Supplement 2016. 2 These parameters are available with the Adobe PostScript Language Supplement 3010.

3 These parameters are Lexmark-specific and are in addition to the Adobe PostScript Language Supplement 3010.