Manuals / Lexmark / Kitchen Appliance / Range

Lexmark C760, C762 4-87, 11 PostScript Emulation Device Parameters Continued, Print Darkness

Models: C762 C760

1 402

Download 402 pages 23.32 Kb

Page 264

Image 264

4-87

PostScript

Table 4-11: PostScript Emulation Device Parameters (Continued)

Key	Type	Definition
Darkness	real	Print Darkness and Toner Saver Setting
		Designates the print darkness and toner saver setting (model specific).
		Legal value: Any non-negative real number from 0.0 to 1.0, inclusive.
		For queries, the Print Darkness setting is returned as a real value:
		Print Darkness	Toner Saver	Darkness Value
		Setting	Setting Value	Returned
		Lightest	On	0.1
		Lighter	On	0.2
		Normal	On	0.3
		Darker	On	0.4
		Darkest	On	0.5
		Lightest	Off	0.6
		Lighter	Off	0.7
		Normal	Off	0.8
		Darker	Off	0.9
		Darkest	Off	1.0

When the Darkness value is changed, the following ranges determine the Print Darkness and Toner Saver setting values:

Darkness Value		Print Darkness	Toner Saver
		Setting Value	Setting Value
0.0 <=value<=0.15		Lightest	On
0.15	<=value<=0.25	Lighter	On
0.25	<=value<=0.35	Normal	On
0.35	<=value<=0.45	Darker	On
0.45	<=value<=0.55	Darkest	On
0.55	<=value<=0.65	Lightest	Off
0.65	<=value<=0.75	Lighter	Off
0.75	<=value<=0.85	Normal	Off
0.85	<=value<=0.95	Darker	Off
0.95	<=value<=1.0	Darkest	Off

Print Darkness Setting

Designates the print darkness (model specific).

Legal value: Any non-negative real number from 0.0 to 1.0, inclusive.

For queries, the Print Darkness setting is returned as a real value:

0.1Lightest

0.3Lighter

0.5Normal

0.7Darker

0.9Darkest

When the Darkness value is modified, the following ranges are used to determine the Print

Darkness setting:

0.0- 0.2 Lightest

>0.2 - 0.4 Lighter

>0.4 - 0.6 Normal

>0.6 - 0.8 Darker

>0.8 - 1.0 Darkest

Page 264

Image 264

Lexmark C760, C762 4-87, 11 PostScript Emulation Device Parameters Continued, Print Darkness and Toner Saver Setting

Contents

March Technical ReferenceSafety Information Edition March1998, 2005 Lexmark International, Inc. All rights reserved UNITED STATES GOVERNMENT RIGHTSYour product uses a laser Contents ContentsTOC-1 PCL EmulationTOC-2 PostScript EmulationContents Switching Languages Printer SpecificationsTOC-3 Flash Memory and DiskTOC-4 PJL SupportPostScript Support IndexCHAPTER 1 Introduction OverviewIntroduction Chapter 5 “Switching Languages” Chapter 2 “PCL Emulation”Chapter 3 “Printer Job Language” Chapter 4 “PostScript Emulation”Chapter 7 “Printer Specifications” Chapter 8 “Printer Interfaces”Appendix A “PCL Support” Appendix B “PJL Support” Appendix C “PostScript Support”Navigational Tips Printing the FileIntroduction Bibliography IntroductionUsing SmartSwitch Using the Operator Panel or MarkVision ProfessionalCHAPTER 2 PCL Emulation Selecting PCL EmulationUsing Your Software Program Page Formatting Printable AreasLexmark C760 and C762 Table 2-1 Lexmark C760 and C762 Paper and Envelope Dimensions1 Pel dimensions are for 600 dpi PaperPrint Area Menu Item Table 2-1 Lexmark C760 and C762 Paper and Envelope Dimensions1 Pel dimensions are for 600 dpi EnvelopeNormal setting Whole Page settingOnly Portrait Orientation is shown for all settings PCL Logical Page AreaFont and Symbol Set Support for the Lexmark C760 and C762 PageEdge Formatted Image with Fit to PagePCL emulation. Not all fonts support all symbol sets Standard PCL Emulation Fonts Table 2-2 Forward and Backward Compatibility Font Selection Commands2-10 2-11 Type 1 FontsTable 2-3 Forward and Backward Compatibility Font Selection Commands 2-12 @PJL RESET@PJL RESET ESC%-12345X2-13 Specialty PCL FontsTable 2-4 Forward and Backward Compatibility Font Selection Commands Selecting Symbol Sets for the Lexmark C760 and C762 2-14Table 2-5 PCL Emulation Symbol Sets - Latin 2-15 Table 2-5 PCL Emulation Symbol Sets Continued - LatinIndicates Typeface supports the specified Symbol Set Indicates Typeface does not support the specified Symbol Set2-16 Table 2-5 PCL Emulation Symbol Sets Continued - LatinIndicates Typeface supports the specified Symbol Set Indicates Typeface does not support the specified Symbol Set2-17 Table 2-5 PCL Emulation Symbol Sets Continued - LatinIndicates Typeface supports the specified Symbol Set Indicates Typeface does not support the specified Symbol Set2-18 Table 2-5 PCL Emulation Symbol Sets Continued - LatinIndicates Typeface supports the specified Symbol Set Indicates Typeface does not support the specified Symbol Set2-19 Indicates Typeface supports the specified Symbol SetIndicates Typeface does not support the specified Symbol Set 2-20 Indicates Typeface supports the specified Symbol SetIndicates Typeface does not support the specified Symbol Set PC-775 Baltic PC-8 Latin2-21 Indicates Typeface supports the specified Symbol SetIndicates Typeface does not support the specified Symbol Set 2-22 Indicates Typeface supports the specified Symbol SetIndicates Typeface does not support the specified Symbol Set ITC Bookman Light ITC Bookman Light Italic ITC Bookman Demi2-23 Indicates Typeface supports the specified Symbol SetIndicates Typeface does not support the specified Symbol Set 2-24 Table 2-7 PCL Emulation Symbol Sets - Specials2-25 Table 2-7 PCL Emulation Symbol Sets Continued - Specials2-26 Table 2-7 PCL Emulation Symbol Sets Continued - Specials2-27 Table 2-7 PCL Emulation Symbol Sets Continued - Specials2-28 Table 2-7 PCL Emulation Symbol Sets Continued - SpecialsIndicates Typeface supports the specified Symbol Set Indicates Typeface does not support the specified Symbol Set2-29 Table 2-7 PCL Emulation Symbol Sets Continued - SpecialsTable 2-8 ISO PCL Emulation Symbol Sets 2-30 Table 2-8 ISO PCL Emulation Symbol Sets ContinuedCommand Structure Commands2-31 Control CodesCommand Structure Command Parameters2-32 Table 2-10 Description of Command StructureLinking Commands 2-33PCL Emulation Commands PCL Emulation Commands by Function2-34 Table 2-11 Job Control2-35 Table 2-11 Job Control ContinuedUnit of Measure Universal Exit Language UEL / Start of PJL2-36 Table 2-12 Page ControlSet Page Size Paper2-37 Table 2-12 Page Control ContinuedSet Universal Feed Direction Set Universal Custom Name2-38 Table 2-12 Page Control ContinuedSet Text Length Set Output Bin2-39 Table 2-12 Page Control ContinuedSet Line Spacing Alternative Method Duplex Page Side Selection2-40 Table 2-13 Alphanumeric IDTable 2-14 Cursor Positioning Alphanumeric ID2-41 Table 2-14 Cursor Positioning ContinuedVertical Cursor Position in Rows Vertical Cursor Position in Decipoints2-42 Select Symbol SetTable 2-15 Font Selection Select Spacing2-43 Select Stroke WeightSelect Default Font Select Underline Type Enable2-44 Table 2-16 User-Defined Symbol SetSymbol Set ID Code Define Symbol Set2-45 Table 2-17 Font CreationTable 2-18 Macros Set Font ID2-46 Pixel PlacementTable 2-19 Print Model Area Fill ID2-47 Table 2-20 User-Defined PatternTable 2-21 Rectangular Area Fill Graphics User-Defined Pattern2-48 Table 2-21 Rectangular Area Fill Graphics ContinuedArea Fill ID Gray Scale Fills2-49 Raster ResolutionTable 2-22 Raster Graphics Raster Graphics Presentation2-50 Table 2-22 Raster Graphics ContinuedSet Raster Compression Mode Transfer Raster Data by Row/Block2-51 Set Raster ConfigurationTable 2-22 Raster Graphics Continued Raster Height Destination2-52 Driver Configuration CommandTable 2-23 Color Extensions Monochrome Print Mode2-53 Configure Image DataTable 2-23 Color Extensions Continued Gamma Correction2-54 Table 2-24 Status ReadbackSet Status Readback Location Type Set Status Readback Location Unit2-55 Table 2-26 Miscellaneous CommandsTable 2-25 Picture Frame Picture Frame Horizontal Size in DecipointsGL/2 Commands 2-56Table 2-26 Miscellaneous Commands Continued Table 2-27 Configuration Group2-57 Table 2-27 Configuration Group ContinuedTable 2-28 Vector Group Table 2-29 Polygon Group2-58 Table 2-29 Polygon Group ContinuedTable 2-30 Character Group 2-59 Table 2-31 Line and Fill Attributes GroupCR red black ref, red white ref, green black ref, green white ref blue black ref, blue white ref2-60 Raster Image GraphicsRaster Compression Mode Syntax2-61 Uncoded DataExample 2-62 Run-Length Encoded DataTagged Image File Format Example2-63 Delta RowExample 2-64 Adaptive CompressionTable 2-32 Adaptive Compression Control Strings Example2-65 ZlibGroup 3 and Group 4 Raster Compression 2-66 Additional Compression Modes2-67 MacrosExample ESC 8UPJL Command Notation CHAPTER 3 Printer Job LanguageTable 3-1 PJL Command Notation Kernel Commands UNIVERSAL EXIT LANGUAGE CommandSyntax ENTER LANGUAGE Command COMMENT CommandSyntax ExampleJob Separation Commands JOB CommandSyntax PASSWORD = number ParametersNAME = job name START = first pageEOJ Command SyntaxParameter Environment Commands and Variables Table 3-2 Environment Variable CategoriesDEFAULT Command Syntaxflash, flash1, disk, or disk1 case insensitive SET Command Syntax3-10 A unique identifier for a file, such as the macro ID for a PCLfor a PCL font, and so on. The filename is case sensitive INITIALIZE Command RESET Command3-11 Syntax3-12 Common Variables for Both Printer LanguagesTable 3-3 Common Variables for Both Printer Languages 3-13 Table 3-3 Common Variables for Both Printer Languages Continuedidentifier exists in this field, the printer writes a random alphanumeric string into this field whenever the critical3-14 Table 3-3 Common Variables for Both Printer Languages Continued3-15 Table 3-3 Common Variables for Both Printer Languages Continuedthe same print job in two separate groups in an output 3-16 Output Bin settingTable 3-3 Common Variables for Both Printer Languages Continued DINQUIRE or3-17 the printer language whose SmartSwitch setting is ONTable 3-3 Common Variables for Both Printer Languages Continued 3-18 a SET or DEFAULT command, the value is changed toTable 3-3 Common Variables for Both Printer Languages Continued If Collation - Collated Copies QTY is not equal to 0, a3-19 Printer Unique Variables for Both Printer LanguagesTable 3-3 Common Variables for Both Printer Languages Continued Table 3-4 Printer Unique Variables for Both Printer Languages3-20 Bond settingAssign Type/Bin DINQUIRE or3-21 Card Stock settingAssign Type/Bin DINQUIRE or3-22 settingAssign Type/Bin DINQUIRE or3-23 When queried, the quotes are not returned around thestring name. The default name is returned unless you 3-24 settingAssign Type/Bin DINQUIRE or3-25 settingAssign Type/Bin DINQUIRE or3-26 settingAssign Type/Bin DINQUIRE or3-27 settingAssign Type/Bin DINQUIRE or3-28 settingAssign Type/Bin DINQUIRE or3-29 settingAssign Type/Bin DINQUIRE or3-30 Envelope settingAssign Type/Bin DINQUIRE or3-31 variable. For more information, see “Status Readback3-32 Glossy settingAssign Type/Bin DINQUIRE or3-33 Factory DefaultVariable Function3-34 Labels settingAssign Type/Bin DINQUIRE or3-35 Letterhead settingAssign Type/Bin DINQUIRE or3-36 Factory DefaultVariable Function3-37 Factory DefaultVariable Function3-38 Factory DefaultVariable Function3-39 settingOverflow Bin DINQUIRE or3-40 Plain settingAssign Type/Bin DINQUIRE or3-41 disable PPDS printer language. After this command isspecified, the printer defaults to the closest number in 3-42 settingAssign Type/Bin DINQUIRE or3-43 Factory DefaultVariable Function3-44 Factory DefaultVariable Function3-45 Factory DefaultTransparency setting INQUIRE value Variable3-46 name is a text string that is truncated to 24 characters3-47 Factory DefaultVariable Function3-48 Common Variables for PCL EmulationTable 3-5 Common Variables for PCL Emulation 3-49 Printer Unique Variables for PCL EmulationTable 3-6 Printer Unique Variables for PCL Emulation 3-50 Table 3-6 Printer Unique Variables for PCL Emulation Continued3-51 Common Variables for PostScript Emulation@PJL SET LPARMPOSTSCRIPT JAMRECOVERY=OFFCRLF Table 3-6 Printer Unique Variables for PCL Emulation Continued3-52 Printer Unique Variables for PostScript EmulationPrinter Unique LRESOURCE Variables Table 3-8 Printer Unique Variables for PostScript Emulation3-53 Table 3-9 Printer Unique LRESOURCE VariablesStatus Readback Commands DINQUIRE Command3-54 SyntaxECHO Command 3-55Syntax Response SyntaxINFO Command 3-56Syntax Response Syntax3-57 INFO CONFIG Response Syntax An ExampleINQUIRE Command 3-58Syntax Response SyntaxUSTATUS Command 3-59Syntax Response SyntaxUSTATUSOFF Command 3-60Table 3-11 USTATUS Unsolicited Status Variable Values Syntax3-61 Status Message FormatInformation Messages Table 3-12 PJL Information Messages3-62 Table 3-12 PJL Information Messages11xyy 12xyy3-63 Auto-Continuable ConditionsTable 3-13 PJL Messages for Auto-Continuable Conditions 3-64 Table 3-13 PJL Messages for Auto-Continuable Conditions Continued3-65 Table 3-13 PJL Messages for Auto-Continuable Conditions Continued3-66 Table 3-13 PJL Messages for Auto-Continuable Conditions Continued3-67 Attendance ConditionsTable 3-14 PJL Message for Attendance Conditions 3-68 Table 3-14 PJL Message for Attendance ConditionsCartridge Life Warning 3-69 Table 3-14 PJL Message for Attendance Conditions3-70 Table 3-14 PJL Message for Attendance ConditionsPerfectFinish Missing 3-71 Table 3-14 PJL Message for Attendance Conditions3-72 Operator Intervention - Paper HandlingTable 3-14 PJL Message for Attendance Conditions 3-73 Table 3-15 PJL Messages for Paper Handling41xyy 41xyy3-74 Table 3-16 Tray CodesTable 3-17 Media Size Codes X Value3-75 Operator Intervention - Paper JamsTable 3-17 Media Size Codes Table 3-18 Output Bin Codes3-76 Table 3-19 PJL Messages for Paper Jamsy represents the tray number. z represents the bin number 3-77 Table 3-19 PJL Messages for Paper Jams Continuedy represents the tray number. z represents the bin number 3-78 Table 3-19 PJL Messages for Paper Jams Continuedy represents the tray number. z represents the bin number 3-79 Table 3-19 PJL Messages for Paper Jams Continuedy represents the tray number. z represents the bin number Device Attendance Commands Service ErrorsRDYMSG Command 3-80OPMSG Command STMSG Command3-81 SyntaxUnique PJL Commands LBEEP CommandLPORTROTATE Command 3-82LPRINT Commands Information Pages LESCAPECHAR Command3-83 Table 3-20 LPRINT testpage Commands3-84 PORT parameterThe following ports are valid parameters for LESCAPECHAR INA INA1 INA2 INA3 LOCALTALK1 LOCALTALK2 LOCALTALK3 PARALLEL PARALLEL1LFAX PHONENUMBER Command 3-85Syntax Table 3-21 LFAX PHONENUMBER “number” ValuesLDOWNLOADTARGET Command File Commands for Flash or Disk3-86 Syntax3-87 Table 3-22 Variables for Flash and Disk File and Password Commandsaccesstype ACCESS = accesstype3-88 symbol set IDfiledevice DEVICE = filedeviceLOPENFILE Command LCLOSEFILE Command3-89 SyntaxLREADFILE Command 3-90Syntax Response SyntaxLWRITEFILE Command LRUNFILE Command3-91 SyntaxLRENAMEFILE Command LDELETEFILE CommandLFORMAT Command LDEFRAG CommandFile and Device Protection Commands Password Protection for a File3-93 Protecting a File or DevicePassword for an Entire Device 3-94@PJL DEFAULT LRESOURCEflash00127000.p5bitmap LWLOCK=passwordCRLF @PJL DEFAULT LRESOURCEflash1023.p5macro LRWLOCK=passwordCRLF3-95 Unlocking a Protected File or DeviceSyntax 3-96 Re-Locking a Protected File or Device@PJL LDELETEPASSWORD LRESOURCE devicefilename.filetypeCRLF Syntax3-97 Unlocking a Protected File or Device for the Current JobSyntax Recovering Lost Passwords 3-98Syntax CHAPTER 4 PostScript Emulation Selecting PostScript EmulationPostScript Using SmartSwitchUsing Your Software Program PostScriptTable 4-1 Paper Sizes Supported Paper Sizescurrentuniversalsize ignoresizesetignoresize Error stackoverflowPaper Tray Support setuniversalsizeError rangecheck, stackunderflow, typecheck PostScriptPostScript Tray Tray Tray Multipurpose Feeder Tray TrayPostScript Table 4-2 Tray Selected with Tray OperatorsNot Supported manualfeed papertrayError stackoverflow Error stackoverflowsetpapertray Errors rangecheck, stackunderflow, typecheckPostScript integer setpapertrayEnvelope Size Support PostScriptTable 4-3 Envelope Sizes Supported 4-10 PostScriptTable 4-4 Literal Names Supported 4-11 Envelope Tray SupportPostScript PageSize x y /ImagingBBox null /Policies/PageSize 0 setpagedevice4-12 PostScriptTable 4-5 Envelopetray Operator Selections Supported4-13 Supplemental Operator Summaryappletalktype buildtimecheckpassword 4-14currentfilenameextend currentmanualduplexmodedefaulttimeouts 4-15deletefile Error stackoverflow4-16 devcontrolPostScript Table 4-6 devcontrol Operator Parameters4-17 devdismountTable 4-7 Unsuccessful devcontrol Parameter Error Codes Errors invalidaccess, rangecheck, typecheck4-18 devforalldevformat PostScript4-19 devmountdevstatus Errors invalidaccess, stackunderflow, undefinedfilename4-20 diskonlineError typecheck Error stackoverflow4-21 diskstatusdisplayoperatormsg doidlefontsdojamrecovery doprinterrors4-22 doret4-23 dostartpagedosysstart duplexer4-24 duplexmodeenginesync Error stackoverflow4-25 filefilenameforall fileposition4-26 firstsidefontnonzerowinding hardwareiomode4-27 initializediskjobname Errors invalidaccess, ioerror, rangecheck, stackunderflow, typecheck4-28 jobsourcePostScript jobtimeout 4-29Error stackoverflow Error stackoverflowmanualfeedtimeout 4-30newsheet pagecount4-31 pagesprintedprintername product4-32 PS2fontsPS3fonts quiet4-33 ramsizerealformat renamefileresolution 4-34revision Error stackoverflow4-35 sccbatchErrors rangecheck, stackoverflow, stackunderflow, typecheck PostScriptsetdefaulttimeouts 4-36sccinteractive setcoverpagesetdojamrecovery setdoprinterrors4-37 setdoidlefonts4-38 setdoretsetdostartpage Errors rangecheck, stackunderflow, typecheck4-39 setdosysstartsetduplexmode Errors invalidaccess, stackunderflow, typecheck4-40 setenginesyncsetethernetaddress setfilenameextend4-41 setfilepositionsethardwareiomode setidlefontssetjobtimeout 4-42setmanualduplexmode Errors rangecheck, stackunderflow, typecheck4-43 setprinternamesetquiet Errors invalidaccess, limitcheck, stackunderflow, typechecksetresolution 4-44setsccbatch Errors rangecheck, stackunderflow, typecheck4-45 setsccinteractivesetsoftwareiomode settumble4-46 setuserdiskpercentsoftwareiomode tumblewaittimeout 4-47userdiskpercent Errors stackoverflow, invalidaccess4-48 Page Device ParametersPostScript Table 4-8 Page Device Parameters4-49 PostScriptTable 4-8 Page Device Parameters Continued 4-50 If A4 is requested but not installed and Letter is installed, LetterPostScript Table 4-8 Page Device Parameters Continued4-51 Jam Recovery is set to OnPostScript Table 4-8 Page Device Parameters Continued4-52 PostScriptTable 4-8 Page Device Parameters Continued Source4-53 PostScriptTable 4-8 Page Device Parameters Continued determines the mapping of the physical input sources to the input sources listed4-54 0 infinite wait or no timeoutPostScript Table 4-8 Page Device Parameters Continued4-55 PostScriptTable 4-8 Page Device Parameters Continued Rows4-56 PostScriptTable 4-8 Page Device Parameters Continued Orientation is assumed to be Landscape regardless of the4-57 PostScriptTable 4-8 Page Device Parameters Continued setpagedevice operator4-58 the DefaultPageSizePolicy key in the DeviceRenderingInfoDefaultPageSizePolicy key in the DeviceRenderingInfo 0 Generate a configurationerror4-59 PostScriptTable 4-8 Page Device Parameters Continued Punch n setpagedevice4-60 PostScriptTable 4-8 Page Device Parameters Continued SlipSheetDetails /Type4-61 PostScriptTable 4-8 Page Device Parameters Continued Causes pages to print as if they are to be side bound as in a book4-62 Interpreter ParametersUser Parameters PostScript4-63 PostScriptTable 4-9 PostScript Emulation User Parameters Continued setcolorscreen, and sethalftone are not affected4-64 PostScriptTable 4-9 PostScript Emulation User Parameters Continued 4-65 System ParametersPostScript Table 4-10 PostScript Emulation System Parameters4-66 PostScriptTable 4-10 PostScript Emulation System Parameters Continued the same as CurInputDevice4-67 Note When a job changes this parameter from False to TruePostScript Table 4-10 PostScript Emulation System Parameters Continued4-68 InstalledRamPostScript Table 4-10 PostScript Emulation System Parameters Continued4-69 Read-only Total amount of memory in bytes installed in thePostScript Table 4-10 PostScript Emulation System Parameters Continued4-70 Negative values are ignored and the previous setting is usedPostScript Table 4-10 PostScript Emulation System Parameters Continued4-71 Device ParametersPostScript 4-72 PCL SmartSwitch is set to OnPCL SmartSwitch is set to Off PostScript4-73 PS SmartSwitch is set to OnPS SmartSwitch is set to Off PostScript4-74 PCL SmartSwitch is set to OnPCL SmartSwitch is set to Off PS SmartSwitch is set to On4-75 PostScriptTable 4-11 PostScript Emulation Device Parameters Continued 4-76 PostScriptTable 4-11 PostScript Emulation Device Parameters Continued 4-77 PostScriptTable 4-11 PostScript Emulation Device Parameters Continued 4-78 PostScriptTable 4-11 PostScript Emulation Device Parameters Continued 4-79 PostScriptTable 4-11 PostScript Emulation Device Parameters Continued 4-80 PostScriptTable 4-11 PostScript Emulation Device Parameters Continued 4-81 PostScriptTable 4-11 PostScript Emulation Device Parameters Continued 4-82 PostScriptTable 4-11 PostScript Emulation Device Parameters Continued 4-83 PostScriptTable 4-11 PostScript Emulation Device Parameters Continued 4-84 PostScriptTable 4-11 PostScript Emulation Device Parameters Continued Device Parameters for the Communication Device %LPR%, %LPRA%, %LPRB%, %LPRC%, %LPRD% %LPRNV% and %LPRPending% contain the same parameters4-85 PostScriptTable 4-11 PostScript Emulation Device Parameters Continued 4-86 PostScriptTable 4-11 PostScript Emulation Device Parameters Continued Device Parameters for the Parameters Device %Engine%4-87 Print Darkness and Toner Saver SettingSetting Setting Value4-88 PostScriptTable 4-11 PostScript Emulation Device Parameters Continued Device Parameters for the Parameters Device %Console%4-89 PostScriptTable 4-11 PostScript Emulation Device Parameters Continued LogicalSize4-90 Read-only Indicates if the flash parameter is only valid when flash is mounted mounted isPostScript Table 4-11 PostScript Emulation Device Parameters Continued4-91 PostScriptTable 4-11 PostScript Emulation Device Parameters Continued Device Parameters for the IODevice %rom%Status and Error Messages 4-92Tagged Binary Not Active Tagged Binary Active4-93 Status MessagesPostScript Table 4-12 Status Message Keys and Value DescriptionsCHAPTER 5 Switching Languages SmartSwitchLanguages Setting SmartSwitch for Different Interfaces Printer Job LanguageLanguages Sniffing LanguagesCHAPTER 6 Flash Memory and Disk MemoryResource Data Collection Download Target MemoryViewing the Contents of Flash Memory and Disk Storing Resources on Flash Memory or DiskMemory Example of Directory Optional Font MemoryPart Name MemoryWrite Password Protected Part NumberMemory Type SizeProt MemoryPassword Protection DescriptionMemory Rewriting the Flash Content MemoryAccessing Files with PostScript Emulation File Naming ConventionsDevice Names Memory6-10 FilenamesFilename Extensions Memory6-11 To add the .data extension automatically again, issueMemory disk%myfont.type1 deletefile6-12 Device Search OrderMemory initializedisk devformat6-13 PerformanceJob Buffering Memory6-14 Creating a PartitionEnabling Job Buffering MemoryRecovering from a Power Loss 6-15Disabling Job Buffering MemoryCHAPTER 7 Printer Specifications SpecificationsAirflow Requirement Noise Emission LevelsElectrical Specifications Power RequirementsSpecifications Table 7-2 Printer Electrical SpecificationsPhysical Specifications Clearance RequirementsSpecifications Altitude Specifications Environmental ConditionsAtmospheric Pressure SpecificationsCHAPTER 8 Printer Interfaces InterfacesSetting Up the Communications Port Setting Up the Communications Port Using Windows 95/98/Me2 Click Settings InterfacesSetting Up the Communications Port Using Windows NT 2 Click SettingsInterfaces Setting Up the Communications Port Using Windows 2 Click SettingsInterfaces Setting Up the Communications Port Using Windows XP InterfacesDeciding Which Interface to Use InterfacesParallel Interface Computer to PrinterPrinter to Computer Advanced Status Parallel Modes 1 andStandard Parallel Connector Using the INIT* Signal to InitializeComputer-to-Printer Communications InterfacesStandard Parallel Connector InterfacesIEEE 1284-B IEEE 1284-A 8-10 Interfaces8-11 Standard Protocol Data Transfer SequenceInterfaces DATA1-8 A B C8-12 Fastbytes Protocol Data Transfer SequenceInterfaces Table 8-1 Typical Parallel Interface Timings8-13 Printer-to-Computer Communication Advanced StatusInterfaces Table 8-2 Fastbytes Timing Sequence8-14 Parallel ModeInterfaces Signal Descriptions 8-15STROBE Receiver for the Lexmark T640x InterfacesDATA 1-8 Signal Driver/Receivers for the Lexmark T640x 8-16AUTOFD* Receiver for the Lexmark T640x InterfacesACKNLG*, ERROR*, SLCT, PE Drivers for the Lexmark T640x 8-17BUSY Driver and INIT* Receiver for the Lexmark T640x ConnectorUsing the RS-232C Serial Interface 8-18SLCTIN* Receiver for the Lexmark T640x Serial InterfaceHow to Connect the RS-232C Serial Interface 8-19RS-232C Serial Cable Pin Assignments Table 8-3 Dedicated Serial Connector Pin Assignments RS-232C8-20 InterfacesLexmark 1038693 50 ft 8-21 Serial Communication Parameters RS-232CVoltage Level Range Serial Data Frame Considerations RS-232C8-22 Start and Stop BitsParity Interfaces8-23 Data Flow ControlInterfaces 8-24 Protocol RS-232CInterfaces Table 8-4 Serial Link All Protocols with Honor DSR On8-25 DTR and DTR/DSR Protocol Timing RS-232CBuffer full Attendance error Printer not in ready state The following diagram illustrates DTR Protocol Timing8-26 XON/XOFF Protocol Timing RS-232CInterfaces Serial Errors Serial Computer Configuration Recommendations RS-232C8-27 Interfaces8-28 Network SupportRS-232C Port Compatibility Windows 95/98/Me/2000, Windows NT 4.0, and Windows XP8-29 Input BufferInterfaces Table 8-6 Input Buffer Sizes in Bytes8-30 InterfacesTable 8-6 Input Buffer Sizes in Bytes Continued APPENDIX A PCL Support PCL SupportTable A-1 PCL Emulation Commands Table A-1 PCL Emulation Commands Continued PCL SupportSupported Not SupportedTable A-1 PCL Emulation Commands Continued PCL SupportSupported Not SupportedTable A-1 PCL Emulation Commands Continued PCL SupportSupported Not SupportedTable A-1 PCL Emulation Commands Continued PCL SupportSupported Not SupportedTable A-1 PCL Emulation Commands Continued Table A-2 GL/2 CommandsPage numbers reference command PCL SupportTable A-2 GL/2 Commands Continued Page numbers reference commandPCL Support SupportedTable A-2 GL/2 Commands Continued Page numbers reference commandPCL Support SupportedTable A-2 GL/2 Commands Continued Page numbers reference commandPCL Support SupportedAPPENDIX B PJL Support PJL SupportTable B-1 Common Variables for Both Printer Languages PJL Support Table B-1 Common Variables for Both Printer Languages ContinuedSupported Not SupportedPJL Support Table B-1 Common Variables for Both Printer Languages ContinuedSupported Not SupportedPJL Support Table B-2 Printer Unique PJL Variables for Both Printer LanguagesSupported Not SupportedPJL Support SupportedNot Supported Page numbers reference variable descriptionsPJL Support SupportedNot Supported Page numbers reference variable descriptionsPJL Support SupportedNot Supported Page numbers reference variable descriptionsPJL Support SupportedNot Supported Page numbers reference variable descriptionsPJL Support SupportedNot Supported Page numbers reference variable descriptionsB-10 PJL SupportSupported Not SupportedB-11 PJL SupportTable B-3 Common Variables for PCL Emulation SupportedB-12 PJL SupportTable B-3 Common Variables for PCL Emulation Continued Table B-4 Printer Unique Variables for PCL EmulationB-13 PJL SupportTable B-5 Common Variables for PostScript Emulation Table B-6 Printer Unique Variables for PostScript EmulationB-14 Table B-8 Status Readback CommandsPage numbers reference command descriptions PJL SupportB-15 PJL SupportTable B-10 PJL Messages for Auto-Continuable Conditions SupportedB-16 PJL SupportTable B-10 PJL Messages for Auto-Continuable Conditions Continued SupportedB-17 PJL SupportTable B-10 PJL Messages for Auto-Continuable Conditions Continued SupportedB-18 PJL SupportTable B-10 PJL Messages for Auto-Continuable Conditions Continued SupportedB-19 PJL SupportTable B-10 PJL Messages for Auto-Continuable Conditions Continued Table B-11 PJL Messages for Attendance ConditionsB-20 PJL SupportTable B-11 PJL Messages for Attendance Conditions Continued SupportedB-21 PJL SupportTable B-11 PJL Messages for Attendance Conditions Continued SupportedB-22 PJL SupportTable B-11 PJL Messages for Attendance Conditions Continued SupportedB-23 PJL SupportTable B-11 PJL Messages for Attendance Conditions Continued SupportedB-24 PJL SupportTable B-11 PJL Messages for Attendance Conditions Continued SupportedB-25 PJL SupportTable B-12 PJL Messages for Paper Handling SupportedB-26 PJL SupportTable B-12 PJL Messages for Paper Handling Continued Table B-13 PJL Messages for Paper JamsB-27 PJL SupportTable B-13 PJL Messages for Paper Jams Continued SupportedB-28 PJL SupportTable B-13 PJL Messages for Paper Jams Continued SupportedB-29 PJL SupportTable B-13 PJL Messages for Paper Jams Continued SupportedB-30 PJL SupportTable B-13 PJL Messages for Paper Jams Continued SupportedB-31 Table B-14 Service ErrorsPJL Support Table B-13 PJL Messages for Paper Jams ContinuedB-32 Table B-16 Lexmark Unique PJL CommandsPage numbers reference command descriptions PJL SupportB-33 Table B-16 Lexmark Unique PJL Commands ContinuedTable B-17 File and Device Protection Commands Page numbers reference command descriptionsAPPENDIX C PostScript Support PostScript SupportTable C-1 Supplemental Operators PostScript Support Table C-1 Supplemental Operators ContinuedSupported Not SupportedPostScript Support Table C-1 Supplemental Operators ContinuedSupported Not SupportedDefault values are listed PostScript SupportTable C-1 Supplemental Operators Continued Table C-2 Page Device ParametersDefault values are listed PostScript SupportTable C-2 Page Device Parameters Continued SupportedDefault values are listed PostScript SupportTable C-2 Page Device Parameters Continued SupportedDefault values are listed PostScript SupportTable C-2 Page Device Parameters Continued SupportedDefault values are listed PostScript SupportTable C-2 Page Device Parameters Continued Table C-3 User Interpreter ParametersDefault values are listed PostScript SupportTable C-3 User Interpreter Parameters Continued Table C-4 System Interpreter ParametersC-10 Default values are listedPostScript Support Table C-4 System Interpreter Parameters ContinuedC-11 Default values are listedPostScript Support Table C-4 System Interpreter Parameters ContinuedC-12 PostScript SupportTable C-5 Devices Supported SupportedC-13 PostScript SupportTable C-5 Devices Supported Continued SupportedC-14 PostScript SupportTable C-6 Device Parameters SupportedC-15 PostScript SupportTable C-6 Device Parameters Continued SupportedC-16 PostScript SupportTable C-6 Device Parameters Continued SupportedC-17 PostScript SupportTable C-6 Device Parameters Continued SupportedC-18 PostScript SupportTable C-6 Device Parameters Continued SupportedC-19 PostScript SupportTable C-6 Device Parameters Continued SupportedC-20 PostScript SupportTable C-6 Device Parameters Continued SupportedC-21 PostScript SupportTable C-6 Device Parameters Continued SupportedC-22 PostScript SupportTable C-6 Device Parameters Continued SupportedC-23 Table C-7 PostScript Commands Message KeysPostScript Support Table C-6 Device Parameters ContinuedIndex IndexIndex Index commands alphabetic 2-34 alphanumeric ID 2-40 color extensions IndexIndex vertical rectangle size decipointsvertical rectangle size PCL Units Index system parameters 4-65 user parameters 4-62 using the operator panel IndexIndex 34 Incorrect Media 34 Wrong Paper Size in Tray xIndex X-10 IndexX-11 IndexX-12 IndexLIMAGEORIENTATION X-13 IndexX-14 IndexX-15 Index

4-87

Print Darkness and Toner Saver Setting

Print Darkness

Toner Saver

Darkness Value

Setting

Setting Value

Returned

Print Darkness Setting