Lexmark C762, C760 manual Infinite wait or no timeout

4-54

PostScript

Table 4-8: Page Device Parameters (Continued)

Key	Type	Definition
ManualFeed	boolean	Indicates if the current (or active) source is a manual source. The following values
		are supported:
		True	Manual feed
		False	Automatic feed
		If ManualFeed is set to True, and a change is made to PageSize, MediaWeight,
		MediaColor, or MediaType parameters, no matching occurs. It is assumed that
		the correct page is fed.
		Note: ManualFeed is initialized at the start of each print job according to the
		default paper source set by the operator panel menus or through PJL. If the
		default paper source is a manual source, ManualFeed is set to True. If the default
		paper source is not a manual paper source, ManualFeed is set to False.
ManualFeedTimeout	integer	Indicates the amount of time that the printer waits for you to manually load a
		sheet of paper.
		0 infinite wait or no timeout
		If the timeout expires, a timeout error is generated.
		This is initialized at the start of each PostScript emulation job to the value of the
		Feed Timeout menu item value.
MediaColor	string name	Specifies the color of the current media.
	or null
MediaPosition	integer	Specifies the tray to select, if possible, whether it is the best match or not.
		Policies may be consulted to determine the selection. For example, assume
		there is legal-size paper in Tray 1 and letter-size paper in all the other trays, and
		the Policy for the PageSize page device parameter is 1. The command
		<< /PageSize [612 1008]/MediaPosition 1 >> setpagedevice
		selects Tray 2 even though Tray 1 is a perfect match, because the PageSize
		Policy of 1 allows the PageSize to be ignored.
MediaType	string name	Indicates the type of the current media. The value of the string is arbitrary and
	or null	may describe any attribute not already defined by size, color, or weight.
MediaWeight	integer or	Specifies the weight of the current media in g/m2. The value is either null or a
	null	number.
NumCopies	integer or	Specifies the number of copies of each page that should be printed. If the value is
	null	null, the current value of #copies determines the number of copies to print.
Nup	boolean	Determines if Nup is On or Off. Use the Nup function to print multiple page
		images on a single page, where the value of N refers to the number of pages. For
		example, 2-Up means two page images are printed on one page.
		True	Nup is On and the NupDetails parameters are active.
		False	Nup is Off.
		For some printers, the value of Nup is set through the Multipage Printing menu
		item. For more information about multipage printing (Nup), see your printer
		documentation.