Lexmark C760, C762 manual Printer Unique Variables for PCL Emulation

3-49 PJL

Printer Unique Variables for PCL Emulation

The following variables are unique to your printer and are supported in PCL emulation only. The [command modifier:value] parameter should be specified as LPARM:PCL. For example:

@PJL SET LPARM:PCL LBITMAPROUNDING=OFF[<CR>]<LF>

To determine which variables your printer supports, see “Table B-4: Printer Unique

Variables for PCL Emulation” on page B-12.

Table 3-6: Printer Unique Variables for PCL Emulation

Variable	Function	Selections	Factory Default
LA4WIDTH	A4 Width in	198, 203	198
	millimeters
LASSIGNFEEDER	Tray Renumber	OFF, 0 to 199	OFF
	Assign Envelope	Variable used with PJL SET or DEFAULT
	Feeder
		command.
		OFF, 0 to 199, NONE	OFF
		Variable used with PJL INQUIRE or DINQUIRE
		command.
LASSIGNMANUALENVELOPE	Tray Renumber	OFF, 0 to 199	OFF
	Assign Manual	Variable used with PJL SET or DEFAULT
	Envelope
		command.
		OFF, 0 to 199, NONE	OFF
		Variable used with PJL INQUIRE or DINQUIRE
		command.
LASSIGNMANUALPAPER	Tray Renumber	OFF, 0 to 199	OFF
	Assign Manual Paper	Variable used with PJL SET or DEFAULT
		command.
		OFF, 0 to 199, NONE	OFF
		Variable used with PJL INQUIRE or DINQUIRE
		command.
LASSIGNMPFEEDER	Tray Renumber	OFF, 0 to 199	OFF
	Assign Multipurpose	Variable used with PJL SET or DEFAULT
	Feeder
		command.
		OFF, 0 to 199, NONE	OFF
		Variable used with PJL INQUIRE or DINQUIRE
		command.