Lexmark C760 Set Text Length, Set Output Bin, Skip Perforation, Set Horizontal Motion Index HMI

2-38 PCL

Table 2-12: Page Control (Continued)

Command / Parameters		Function / Result
ESC&l#F		Set Text Length
# = number of lines		Sets the bottom margin length in lines, measured from the first line of
Default = 60 or 64 (Country specific)		the page.
		Text Length equals Logical Page Length —1 inch (—1/2 inch for top and
		—1/2 inch for bottom).
ESC&l#G		Set Output Bin
0	Auto Select (uses the active bin)	Sets the exit path to direct paper to one of the output bins.
1	Standard Bin
2	Bin 1 or Rear Bin
3	Bin 1 or Rear Bin
4	Bin 2
5	Bin 3
6	Bin 4
7	Bin 5
8	Bin 6
9	Bin 7
10	Bin 8
11	Bin 9
12	Bin 10
ESC&l#L		Skip Perforation
0	Off	Perforation area includes the area from the bottom margin of the
1	On (Default)	current page to the top margin of the next page. When skipping
		perforations, a line feed past the bottom margin ejects a page and
		places the cursor at the top margin of the next page.
ESC&k#H		Set Horizontal Motion Index (HMI)
# = number of 1/120 inch increments		Sets the width of all characters for fixed-space fonts. Sets only the
(Valid to 4 decimal places)		width of the space for proportional spaced fonts.
ESC&l#C		Set Vertical Motion Index (VMI)
# = number of 1/48 inch increments		Sets Vertical Motion Index in 1/48 inch increments. The VMI
(Valid to 4 decimal places)		determines the vertical distance between lines.
Default = 8		Notes:
		• For some printers, you can change the default VMI from the printer
		operator panel or through MarkVision Professional by using the
		Lines Per Page menu item. See your printer documentation for
		more information.
		• Use of this command alters any previous Set Line Spacing
		command settings.