Lexmark C762 4-58, PostScript, 8 Page Device Parameters Continued, Generate a configurationerror

4-58

PostScript

Table 4-8: Page Device Parameters (Continued)

Key	Type	Definition
PageSize	array	Specifies the size (width and height) of the current page in 1/72 inch units. A
		value of [0 0] is assumed to be the lower left corner of the physical page and
		[width height] is the upper right corner.
Policies	dictionary	Uses entries to describe the actions to perform when a particular function cannot
		be completed. The entries are as follows:
		PageSize is an integer that specifies what recovery action to use when PageSize
		cannot be matched with any available media (paper, envelope, or other print
		materials). The actions are:
		0	Generate a configurationerror. (default)
		1	Ignore the requested PageSize.
		2	Interact with a human operator or print manager.
		3	Select the next larger or smaller available media and adjust the
			page to fit.
		4	Select the next larger available media and adjust the page to fit.
		5	Select the next larger or smaller available media, but do not adjust
			the page.
		6	Select the next larger available media, but do not adjust the page.
		7	Disable media selection. Implement the requested PageSize on the
			previously selected media without making adjustments. The way
			the image is positioned on the media is printer-dependent and may
			result in part of the image being clipped.
		23	If the SubstituteSize parameter from the DeviceRenderingInfo
			dictionary is set to Off, the effective policy executed is the value of
			the DefaultPageSizePolicy key in the DeviceRenderingInfo
			dictionary. If the SubstituteSize parameter from the
			DeviceRenderingInfo dictionary is set to a value other than Off
			and an installed source has installed media which may be
			substituted for the requested media, the effective policy executed is
			3. If the SubstituteSize parameter from the DeviceRenderingInfo
			dictionary is set to a value other than Off and a media substitution
			cannot be made, the effective policy executed is the value of the
			DefaultPageSizePolicy key in the DeviceRenderingInfo
			dictionary.

PolicyNotFound is an integer that specifies which recovery action to use when a requested feature other than PageSize cannot be matched with any key in the Policies dictionary.

The actions are:

0Generate a configurationerror.

1Ignore the requested feature (default).

2Interact with a person or print manager.

PolicyReport is a procedure that is called when a successful setpagedevice is finished. The procedure consults policies to process unsatisfied feature requests if needed. Default value is {pop}.

PostRenderingEnhance boolean Always True to indicate that PostRenderingEnhanceDetails is enabled.