Lppdsformlines, Ppds, Lppdslinesperinch | Lexmark C760, C762

	3-41	PJL

Table 3-4: Printer Unique Variables for Both Printer Languages (Continued)

Variable	Function	Selections	Factory Default
LPPDS	Activate	ON, OFF	OFF
(DEFAULT only)	Personal	Use ON to enable PPDS printer language and OFF to
(DEFAULT only)	Printer Data	Use ON to enable PPDS printer language and OFF to
	Printer Data	disable PPDS printer language. After this command is
	Stream (PPDS)	disable PPDS printer language. After this command is
	Stream (PPDS)	processed, the printer performs a Power On Reset
	printer	processed, the printer performs a Power On Reset
	printer	(POR) to activate the changes.
	language	(POR) to activate the changes.
	language	Note: The following printer settings in NVRAM are
		Note: The following printer settings in NVRAM are
		changed when PPDS is activated:
		• PCL and PS SmartSwitch settings for each port are
		turned off.
		• Printer Language is set to PPDS.

LPPDSFORMLINES	Lines Per Page	1 to 255	64, 68
(DEFAULT only)	(PPDS)		(Country specific)
(DEFAULT only)

LPPDSLINESPERINCH	Lines Per Inch	0.25 to 30.00 in increments of 0.25	6.00
(DEFAULT only)		Note: If a Lines Per Inch setting outside this range is
		specified, the printer defaults to the closest number in
		the range.

LPREPRINTEDLENGTH	Preprinted	NORMAL, SHORT	NORMAL
(DEFAULT only)	Paper Length
(DEFAULT only)

LPREPRINTEDLOADING	Preprinted	OFF, DUPLEX	OFF
(DEFAULT only)	Paper Loading
(DEFAULT only)

Image 120

Lexmark C760, C762 manual Lppdsformlines, Ppds, Lppdslinesperinch, Lpreprintedlength, Lpreprintedloading

Contents

Technical Reference March Edition March Page Contents TOC-2 PostScript Emulation Switching Languages Printer Specifications TOC-4 PJL Support PostScript Support Index Introduction Overview PCL Emulation Technical Reference Documentation Available in Hard Copy Printer Specifications Navigational Tips Printing the File Bibliography Using SmartSwitch Using the Operator Panel or MarkVision ProfessionalSelecting PCL Emulation Using Your Software Program Formatting Printable Areas Lexmark C760 and C762 Paper and Envelope Dimensions Lexmark C760 and C762Paper Print Area Menu Item Envelope PCL Font and Symbol Set Support for the Lexmark C760 and C762 PCL Forward and Backward Compatibility Font Selection Commands Standard PCL Emulation Fonts PCL Type 1 Fonts Backward Forward and Backward Compatibility Mode Specialty PCL Fonts Selecting Symbol Sets for the Lexmark C760 and C762 PCL Emulation Symbol Sets LatinPC850 PC858 PCL PCL PCL Wingdings Symbol SymbolPS ITC Zapf Dingbats OCR-A OCR-B PC852 WINL5 ISOL5 PC8TK Greek-8 Typeface / Symbol PJL Value PCL Typeface / Symbol Set PJL Value Symbol Set ID Wingdings Symbol PCL Emulation Symbol Sets Specials Symbol Set ID 15U 15Y 109Y 209Y 19M 579L 10L 14L PCL PCL PCL 15U 15Y 109Y 209Y 19M 579L 10L 14L ISO PCL Emulation Symbol Sets Symbol Set ID Symbol Set / TypefaceISO 6 Ascii ISO 14 JIS Ascii ISO 57 Chinese Command Structure CommandsControl Codes Control Codes Command Structure Command Parameters10 Description of Command Structure Element Description Linking Commands PCL Emulation Commands PCL Emulation Commands by FunctionCommand / Parameters Function / Result 11 Job Control Unit of Measure Universal Exit Language UEL / Start of PJL 12 Page Control Set Universal Feed Direction Set Universal Custom NameSelect Orientation Print Direction Set Text Length Set Output BinSkip Perforation Set Horizontal Motion Index HMI Text Scale Mode Set Line Spacing Alternative MethodDuplex Page Side Selection Set Page Length 13 Alphanumeric ID 14 Cursor Positioning Vertical Cursor Position in Rows Vertical Cursor Position in DecipointsVertical Cursor Position in PCL Units Half Line-Feed 15 Font Selection Select Stroke Weight Select Default FontSelect Underline Type Enable Underline Disable 16 User-Defined Symbol Set 17 Font Creation 18 Macros 19 Print Model 20 User-Defined Pattern 21 Rectangular Area Fill Graphics Fill Rectangular Area 22 Raster Graphics Set Raster Compression Mode Transfer Raster Data by Row/BlockEnd Raster Graphics Version B End Raster Graphics Version C Set Raster Configuration Raster Height DestinationData 23 Color Extensions Configure Image Data Gamma CorrectionRender Algorithm Color Component One 24 Status Readback 26 Miscellaneous Commands 25 Picture Frame GL/2 Commands 27 Configuration GroupCommand / Parameter Command Name 28 Vector Group 29 Polygon Group 30 Character Group 31 Line and Fill Attributes Group Raster Compression Mode Raster Image GraphicsSyntax Parameters Uncoded Data Example Run-Length Encoded Data Tagged Image File Format Delta Row Scan Mode CountH,CountL Data Adaptive Compression32 Adaptive Compression Control Strings Zlib Group 3 and Group 4 Raster Compression Additional Compression Modes Macros PJL Command Notation PJL Command NotationCharacter Code Description Hex Code Decimal Code ESC Kernel Commands Universal Exit Language Command Enter Language Command Comment Command Job Separation Commands JOB Command Start = first EOJ Command Parameter Environment Commands and Variables Environment Variable CategoriesBeginning Categories Default Command SET Command Flash, flash1, disk, or disk1 case insensitive Initialize Command Reset Command Variable Function Selections Factory Default Common Variables for Both Printer LanguagesCommon Variables for Both Printer Languages Cplock ON, OFFDensity Duplex Holdtype PUBLIC, Private PublicImageadapt INTRAY2 Joboffset ON, OFF, BETWEENJOBS, BetweencopiesLang DANISH, GERMAN, ENGLISH, SPANISH, French Dinquire or Output Bin setting Inquire value Password PowersaveParallel SLOW, Fast Powersavetime ON, OFF, Auto ResolutionTimeout QTY Printer Unique Variables for Both Printer Languages Printer Unique Variables for Both Printer Languages Assign Type/Bin Dinquire or Bond setting Inquire value OPTIONALOUTBIN2, OPTIONALOUTBIN3 Disabled LcardstockweightLcardstockoutbin Lcardstocktexture Lcoloredweight LcoloredloadingLcoloredoutbin Lcoloredtexture Lcustompaperheight LcustompaperfeedSHORTEDGE, Longedge Shortedge LCUSTOMTYPE1LENGTH LCUSTOMTYPE1WEIGHT LCUSTOMTYPE1OUTBINLCUSTOMTYPE1TEXTURE LCUSTOMTYPE2LENGTH LCUSTOMTYPE2WEIGHT LCUSTOMTYPE2NAMECUSTOMTYPE2 LCUSTOMTYPE2OUTBIN LCUSTOMTYPE3WEIGHT LCUSTOMTYPE3MEDIALABELS, CARDSTOCK, Envelope Cottonpaper LCUSTOMTYPE3NAME CUSTOMTYPE3 LCUSTOMTYPE4WEIGHT LCUSTOMTYPE4LOADINGLCUSTOMTYPE4MEDIA LABELS, CARDSTOCK, Envelope Cottonpaper LCUSTOMTYPE4NAME LCUSTOMTYPE5LENGTH LCUSTOMTYPE5LOADINGLCUSTOMTYPE5MEDIA LABELS, CARDSTOCK, Envelope Cottonpaper LCUSTOMTYPE5NAME LCUSTOMTYPE5WEIGHT LCUSTOMTYPE6LENGTHLCUSTOMTYPE6LOADING LCUSTOMTYPE6MEDIA Assign Type/Bin Dinquire or Envelope setting Inquire value Lenvelopeweight LfaxresolutionPRINT, DONOTPRINT, Printerror Lenvelopetexture Assign Type/Bin Dinquire or Glossy setting Inquire value Otherenvelope Ljamrecovery LimageenhancetypeLimageorientation DONOTROTATE, Rotatepaper Donotrotate Assign Type/Bin Dinquire or Labels setting Inquire value Lletterheadweight LletterheadoutbinLletterheadtexture Lmanualcolorrgbtext OFF, VIVID, VIVIDCMYK, USCMYK, Eurocmyk Uscmyk US Image LmanualenvelopesizeLmanualenvelopetype Lmanualpapersize Lmultipageprint LmultipageviewAUTO, SHORTEDGE, Longedge Auto Lnpap LOPTIONALOUTBIN1NAME Loutbinconfig LOPTIONALOUTBIN6NAMEOUTBIN6 LOPTIONALOUTBIN7NAME Overflow Bin Dinquire or Setting Inquire value Assign Type/Bin Dinquire or Plain setting Inquire value Lppds LppdsformlinesPpds Lppdslinesperinch Lpreprintedweight LpreprintedoutbinLpreprintedtexture Lprintbuffer Lreset LprintqualityQUICKPRINT, NORMAL, Presentation Normal GRAPHICS, IMAGES, 1200IMAGEQ, Inksaver NORMAL, Best Lpunch ON, OFF, AUTO, FRONT, BACK, DUAL, 0, 1 Lstaplesemptyalarm LstandardoutbinnameLstrokewidth Lstaple Ltransparencyweight LtransparencyoutbinLtransparencytexture LTRAY1SENSEDTYPE LTRAY3SENSEDTYPE LETTERHEAD, PREPRINTED, Colored CUSTOMTYPE3LTRAY4SENSEDTYPE LETTERHEAD, PREPRINTED, Colored CUSTOMTYPE4 Lusdefaults LTRAY2PAPERTYPELTRAY3PAPERTYPE LTRAY4PAPERTYPE Common Variables for PCL Emulation Common Variables for PCL Emulation Printer Unique Variables for PCL Emulation Printer Unique Variables for PCL Emulation LASSIGNTRAY1 LASSIGNTRAY2LASSIGNTRAY3 LASSIGNTRAY4 Variable Function Selections Default Common Variables for PostScript EmulationCommon Variables for PostScript Emulation Factory Printer Unique Variables for PostScript Emulation Printer Unique Lresource VariablesPrinter Unique Variables for PostScript Emulation ON, OFF Lpsfontpriority Printer Unique Lresource Variables Status Readback Commands Dinquire CommandResponse Syntax Echo Command Info Command 10 Info Category Parameter ValuesCategory Values Description Info Config Response Syntax An Example Manual Feedcrlf Inquire Command Ustatus Command Ustatusoff Command 11 Ustatus Unsolicited Status Variable ValuesUstatus Variable Value Description Status Message Format Information Messages12 PJL Information Messages Printer State Status Code Display String Online Status 11xyy Auto-Continuable Conditions 13 PJL Messages for Auto-Continuable ConditionsStatus Printer State Code Display String Online Status Intervention required 30018 Serial 1 Port Disabled Intervention required 30075 Scheduled Maintenance Intervention required 32002 Disk Full Attendance Conditions 14 PJL Message for Attendance Conditions Cartridge life warning Intervention required 40021 Print cartridge missing Intervention required 40022 Intervention required 40037 Opmsg Stmsg Operator Intervention Paper Handling 15 PJL Messages for Paper Handling 16 Tray Codes 17 Media Size CodesValue Tray YY Value Media Size Operator Intervention Paper Jams 18 Output Bin CodesWW Value Output Bin 19 PJL Messages for Paper Jams Intervention required 4232x Intervention required 4253w Intervention required 4281w Device Attendance Commands Service ErrorsRdymsg Command Opmsg Command Stmsg Command Unique PJL Commands Lbeep CommandLportrotate Command Lprint Commands Information Pages Lescapechar Command20 Lprint testpage Commands Testpage Value Description INA Lfax Phonenumber Command 21 Lfax Phonenumber number ValuesCharacter Description Ldownloadtarget Command File Commands for Flash or Disk 22 Variables for Flash and Disk File and Password Commands Parameter Syntax Description MAC5 Lopenfile Command Lclosefile Command Lreadfile Command Lwritefile Command Lrunfile Command Lrenamefile Command Ldeletefile CommandLformat Command Ldefrag Command File and Device Protection Commands Password Protection for a FileProtecting a File or Device Password for an Entire Device Unlocking a Protected File or Device Re-Locking a Protected File or Device Unlocking a Protected File or Device for the Current Job Recovering Lost Passwords PostScript Emulation Selecting PostScript Emulation Paper Sizes Supported Paper SizesModels Literal Name Size mm Size inches Size points C760 C762 Error stackoverflow Errors rangecheck, stackunderflow, typecheckCurrentuniversalsize Ignoresize Error rangecheck, stackunderflow, typecheck Paper Tray SupportSetuniversalsize Where x y are the PageSize in points Tray Selected with Tray Operators Printer Manualfeed Papertray Setpapertray Envelope Size Support Envelope Sizes SupportedEnvelope Sizes Size C760 C762 Literal Name Size mm Size inches Points Literal Names Supported Envelope Tray Support Envelopetray Operator Selections Supplemental Operator Summary AppletalktypeBuildtime Byteorder Checkpassword Errors stackunderflow, typecheckCurrentfilenameextend Currentmanualduplexmode Defaulttimeouts Deletefile Devcontrol Devcontrol Operator Parameters Unsuccessful devcontrol Parameter Error Codes Errors invalidaccess, rangecheck, typecheckErrors invalidaccess, stackunderflow, undefinedfilename Devdismount Devforall DevformatSystemdict Devmount Devstatus Error typecheck Diskonline Diskstatus DisplayoperatormsgDoidlefonts Dojamrecovery DoprinterrorsDoret Dostartpage DosysstartDuplexer Duplexmode Enginesync Errors ioerror, stackoverflow, stackunderflow, typecheck FileFilenameforall Fileposition Firstside FontnonzerowindingHardwareiomode Idlefonts Initializedisk Jobname Jobsource Jobtimeout LPRB% LPRC% Manualfeedtimeout Errors stackoverflow, undefinedNewsheet Pagecount Pagesprinted PrinternameProduct PS2fonts PS3fontsQuiet Ramsize RealformatRenamefile Resolution Revision Errors rangecheck, stackoverflow, stackunderflow, typecheck SccbatchStop Bits Data Style Flow Control Parity Setdefaulttimeouts Errors invalidaccess, rangecheck, stackunderflow, typecheckSccinteractive Setcoverpage Setdojamrecovery SetdoprinterrorsErrors invalidaccess, stackunderflow, typecheck Setdoidlefonts Setdoret Setdostartpage Errors configurationerror, stackunderflow, typecheck SetdosysstartSetduplexmode Setenginesync SetethernetaddressSetfilenameextend Error unmatchedmark SetfilepositionSethardwareiomode Setidlefonts Setjobtimeout Error stackunderflow, typecheckSetmanualduplexmode Errors invalidaccess, limitcheck, stackunderflow, typecheck SetprinternameSetquiet Setresolution Error stackunderflowSetsccbatch Errors stackunderflow, typecheck, invalidaccess, rangecheck SetsccinteractiveSetsoftwareiomode Settumble Setuserdiskpercent SoftwareiomodeTumble Waittimeout Errors stackoverflow, invalidaccessUserdiskpercent Device Parameters Device ParametersKey Type Definition TonerSaver, PictureGrade, ImageEnhancement, PrintDarkness PostScript Information on PageSize, see Menu item. The following values are supported Key Source InputAttributes. The allowable values are Infinite wait or no timeout Rows Columns Horizontal VerticalReverse Horizontal Reverse Vertical Orientation specified by the PageSize parameter Setpagedevice operator Findcolorrendering operator DefaultPageSizePolicy key in the DeviceRenderingInfo Generate a configurationerror Power Saver menu item SlipSheetDetails Dictionary Printer. Supported values are Interpreter Parameters User ParametersPostScript Emulation User Parameters HalftoneMode Integer Setcolorscreen, and sethalftone are not affected Printer for a specific job System Parameters 10 PostScript Emulation System Parameters Same as CurInputDevice Also transmitted to the host over the communications InstalledRam Read-only Total amount of memory in bytes installed To change the values of device parameters Device Parameters 11 PostScript Emulation Device Parameters PCL Ppds PS SmartSwitch is set to On PS SmartSwitch is set to Off PCL SmartSwitch is set to On PostScript PostScript DelayedOutputClose Boolean PostScript PostScript PostScript PostScript PostScript PostScript PostScript PostScript Device Parameters for the Parameters Device %Engine% Print Darkness and Toner Saver Setting Darkness Value Print Darkness Toner Saver Setting ValuePrint Darkness Setting Device Parameters for the Parameters Device %Console% CalendarD%Device Parameters for the IODevice Device %disk1% LogicalSize Device Parameters for the IODevice %flash1% HasNames Boolean Device Parameters for the IODevice %rom% Status and Error Messages Tagged Binary Not ActiveTagged Binary Active Status Messages 12 Status Message Keys and Value DescriptionsKey Value Description USB Switching Languages SmartSwitch Setting SmartSwitch for Different Interfaces Printer Job Language Sniffing Flash Memory and Disk Resource Data Collection Download Target Viewing the Contents of Flash Memory and Disk Example of Directory Part Name Part Number Size Password Protection Description Rewriting the Flash Content Accessing Files with PostScript Emulation File Naming ConventionsDevice Names Filenames Filename Extensions To add the .data extension automatically again, issue Device Search Order Initializedisk Devformat Performance Job BufferingDevice Performance Retrieval Speeds Device Retrieval Speed Write Creating a Partition Enabling Job Buffering Recovering from a Power Loss Disabling Job Buffering Airflow Requirement Noise Emission LevelsNoise Emission Levels Electrical Specifications Power RequirementsPrinter Electrical Specifications Printer Model Electrical Specification Physical Specifications C762 Dimension With Finisher Max Input TraysClearance Requirements Printer Model Altitude Specifications Environmental ConditionsAtmospheric Pressure Printer Interfaces Setting Up the Communications Port Setting Up the Communications Port Using Windows 95/98/MeClick Settings Click the Device Manager tab Setting Up the Communications Port Using Windows NT Setting Up the Communications Port Using Windows Setting Up the Communications Port Using Windows XP Deciding Which Interface to Use Parallel Interface Computer to Printer Standard Parallel Connector Using the INIT* Signal to InitializeComputer-to-Printer Communications Standard Parallel Connector Interfaces Standard Protocol Data Transfer Sequence Fastbytes Protocol Data Transfer Sequence Typical Parallel Interface TimingsTime Name Minimum/Maximum Printer-to-Computer Communication Advanced Status Fastbytes Timing Sequence Parallel Mode Signal Descriptions Strobe Receiver for the Lexmark T640x Data 1-8 Signal Driver/Receivers for the Lexmark T640x AUTOFD* Receiver for the Lexmark T640x ACKNLG*, ERROR*, SLCT, PE Drivers for the Lexmark T640x Busy Driver and INIT* Receiver for the Lexmark T640x Using the RS-232C Serial Interface SLCTIN* Receiver for the Lexmark T640xSerial Interface How to Connect the RS-232C Serial Interface Dedicated Serial Connector Pin Assignments RS-232CPin Signal Direction Description RS-232C Serial Cable Pin Assignments To 25 Pin Cable Adapter Such as IBM 6450242 10 Serial Communication Parameters RS-232C Voltage Level Range Start and Stop Bits Data Flow Control Protocol RS-232C Serial Link All Protocols with Honor DSR OnSerial Link All Protocols with Honor DSR Off DTR and DTR/DSR Protocol Timing RS-232C XON/XOFF Protocol Timing RS-232C Serial Errors Serial Computer Configuration Recommendations RS-232C Network Support RS-232C Port Compatibility Input Buffer Input Buffer Sizes in BytesSerial Network Memory Size Parallel Buffer Size LocalTalk Fax 1MB Table A-1 PCL Emulation Commands Appendix a PCL Support Size Primary Font Symbol Set Logical Operation End Raster Graphics Version B Table A-2 GL/2 Commands Command Function T640, T642, T644 PCL Support PCL Support PCL Support Table B-1 Common Variables for Both Printer Languages Variable Name T640, T642, T644 PJL Support PJL Support T644 T642T640 Variable Name PJL Support PJL Support PJL Support PJL Support PJL Support PJL Support Table B-3 Common Variables for PCL Emulation Table B-4 Printer Unique Variables for PCL Emulation Variable Name T640, T642 Table B-5 Common Variables for PostScript Emulation Table B-6 Printer Unique Variables for PostScript EmulationTable B-7 Printer Unique Lresource Variables Table B-8 Status Readback Commands Command Name T640, T642Table B-9 Ustatus Unsolicited Status Variables Device JOB Timed Table B-10 PJL Messages for Auto-Continuable Conditions Status T640 Message Code Return String Parallel Port Disabled Intervention Required 30018 Intervention Required 30075 Intervention Required 32001 Table B-11 PJL Messages for Attendance Conditions Message Code Return String T642Status Close Deflector G Intervention Required 40021 Close Tray x Top Cover Intervention Required 40021 Intervention Required 40029 Black Photo Dev Life Warning Intervention Required 40038 Intervention Required 40049 Stmsg message Table B-12 PJL Messages for Paper Handling 41xxy Table B-13 PJL Messages for Paper Jams Message Status Code T640, T642 PJL Support PJL Support PJL Support PJL Support Table B-14 Service Errors 50000 Table B-16 Lexmark Unique PJL Commands Command T640, T642Table B-15 Device Attendance Messages Lbeep Ldownloadtarget Lportrotate Table B-17 File and Device Protection Commands Lrunfile Lrenamefile Ldeletefile Lformat Ldefrag Table C-1 Supplemental Operators Operator Name T640, T642 PostScript Support PostScript Support Table C-2 Page Device Parameters Key PostScript Support PostScript Support SlipSheet SlipSheetDetails SlipSheetSource Type Key Default T640, T642 Table C-3 User Interpreter Parameters Table C-4 System Interpreter Parameters PostScript Support PostScript Support Table C-5 Devices Supported Device T640 T642 T644USBA% USBB% USBC% USBD% LPRA% LPRB% LPRC% LPRD% Table C-6 Device Parameters Key T640, T642 PostScript Support PSSmartSwitch Type DelayedOutputClose Enabled Filtering HasNames Interpreter PortLocation Type Device Parameters for the Parameters Device %Engine% Device Parameters for the Parameters Device %Console% PostScript Support Device Parameters for the Parameters Device %flash1% Table C-7 PostScript Commands Message Keys Index Index Index Index Set page length Index Index Index Comment Lprinttestpage Index Lstandardoutbinname Autofd Index Index