Lexmark C760, C762 manual 4-45, setsccinteractive, setsoftwareiomode, settumble, PostScript

Models: C762 C760

1 402
Download 402 pages 23.32 Kb
Page 222
Image 222
4-45

4-45 setsccinteractive

PostScript

setsccinteractive

channel baud options setsccinteractive

supports compatibility with the IBM LaserPrinters 4019, 4029, and 4039. It is parsed, and three integers are removed from the stack and discarded.

Errors: invalidaccess, rangecheck, stackunderflow, typecheck

setsoftwareiomode

integer setsoftwareiomode —

supports compatibility with the IBM LaserPrinters 4019, 4029, and 4039. It is parsed, and an integer is removed from the stack and discarded.

This command validates that the integer value provided is an Adobe-supported value of 0, 1, 2, 3, 4, 5, or 100, and then discards the operator and value.

Errors: stackunderflow, typecheck, invalidaccess, rangecheck

settumble

boolean settumble —

sets the value of the Tumble page device parameter for the current print job.

true sets the tumble setting to short-edge binding (back side of the duplexed page prints upside down in relation to the front side) false sets the tumble setting to long-edge binding (back side of the

duplexed page prints in the same orientation as the front) (default)

No error is generated if a duplex unit is not installed.

Notes:

At the start of the next print job, the setting for tumble is reset to the user default setting for the Duplex Bind menu item.

If tumble is changed between the printing of a front and back side of a duplexed sheet, a blank back side is not ejected.

This operator is equivalent to executing the following PostScript emulation sequence:

<< /Tumble boolean >> setpagedevice

Errors: stackunderflow, typecheck

Page 222
Image 222
Lexmark C760, C762 4-45, setsccinteractive, setsoftwareiomode, settumble, PostScript, Errors stackunderflow, typecheck