Lexmark C760, C762 manual 4-67, 10 PostScript Emulation System Parameters Continued

4-67

PostScript

Table 4-10: PostScript Emulation System Parameters (Continued)

Key	Type	Definition
DoPrintErrors	boolean	Specifies whether to print an error page using a built-in error
		handler when a PostScript emulation error occurs.
		True	Print PS Error user default value is set to On.
		False	Print PS Error user default value is set to Off.
DoStartPage	boolean	(Read only) Always returns False.
EnableExtraFonts1	boolean	True	All 75 resident fonts are enabled.
		False	Original 39 PostScript fonts are available.
		Note: Changes to this parameter take effect when PostScript
		is restarted.
EngineBoot1	string	(Read-only) Specifies the version of the boot code.
EngineCode1	string	(Read-only) Specifies the version of the engine code.
EngineSpeed1	integer	(Read-only) Maximum speed of the print engine in pages per
		minute.
EnvironmentSave2	boolean	Indicates or modifies the Resource Save user default value.
		True	Resource Save user default value is set to On.
		False	Resource Save user default value is set to Off.
		Note: When a job changes this parameter from False to True,
		all interpreter tasks such as PostScript and PCL are
		terminated and restarted at the end of the current job.
FactoryDefaults	boolean	If set to True and the printer is then immediately powered off,
		all non-volatile parameters revert to factory default values at
		the next power-on. The print job that sets FactoryDefaults to
		True must be the last job executed before power-off;
		otherwise, the request is ignored.
FatalErrorAddress	integer	The address at which a fatal system software error occurred.
		It is stored in this parameter before execution is stopped. It is
		also transmitted to the host over the communications
		channel.
FontResourceDir	string	Specifies the location in the file system for font resource files.
FontVersion1	string	(Read-only) The version of the font read-only memory (ROM).
GenericResourceDir	string	Specifies the location in the file system for resource files.
GenericResourcePathSep	string	Concatenated to the GenericResourceDir and the category
		name. It is followed by the resource name to get the external
		location of the resource.
		Example: If GenericResourceDir and
		GenericResourcePathSep were (Resource/) and (/),
		respectively, the LexmarkLogo resource of the Pattern
		category would be in Resource/Pattern/LexmarkLogo.

1 These parameters are Lexmark-specific and are in addition to the Adobe PostScript Language Supplement 2016. 2 These parameters are available with the Adobe PostScript Language Supplement 3010.

3 These parameters are Lexmark-specific and are in addition to the Adobe PostScript Language Supplement 3010.