Xerox manual Control Panel Messages, DocuPrint N4525 Network Laser Printer

Control Panel Messages

Error	Description and corrective action
Close Door G	■ Close Door G (the front door of the finisher).
Close Duplx Unit	■ Close the Duplex Module.
Close Staple	■ Close the front door of the finisher.
Door
CRUM Failure	A Laser Print Cartridge memory failure has occurred.
Power Off/On	■	Power OFF and ON the printer.
	■	If the problem returns, printing cannot resume. Power OFF the printer and
		replace the Laser Print Cartridge.
Delete Jobs	Appears when using the Reset Menu to delete secure and proof jobs from the
	hard disk.
	■ Press the Item keys (labeled 2 or 6) to toggle between Yes and No.
	■	Select Yes and press the Enter key (labeled 4) to delete the jobs.
	■ Select No and press the Enter key to exit without deleting the jobs.
Deleting...	Tells you that the secure and proof jobs you asked to delete (in the previous
Job name	message) are being deleted.
Demo Mode	Appears when using the Reset Menu.
	■ Press the Item keys (labeled 2 or 6) to toggle between Yes and No.
	■ Select Yes and press the Enter key (labeled 4) to enter printer demonstration
		mode.
	■ Select No and press the Enter key to exit without entering printer
		demonstration mode.
Disk Error	A general failure (such as read/write) of the hard disk has occurred.
Format Disk	■ Power OFF and ON the printer.
	■	If this message appears again at Power ON, contact your Customer Support
		Center.
Disk Full	A secure or proof job spooled to the disk exceeds the available free space on
	the hard disk. The job will be cancelled and deleted after part of the first copy
	is printed. The job is cancelled and deleted after printing the first copy of the
	partial job.
	■ Delete fonts, macros, or secure and proof jobs to make space on the hard disk.
Downloading	The printer is being loaded with new operating code.
Please Wait	■	Please wait.
Download Failed	A problem occurred while downloading printer operating code. Printing may
Please Reboot	continue, but the disk is locked out.
	■	Reboot and try downloading again.
Download Passed	The downloading process has passed and the printer must be rebooted for
Please Reboot	changes to take effect.
	■	Reboot the printer.
Duplex Unit Fail	The Duplex Module has failed. Printing from the Duplex Module cannot
Power Off/On	continue.
	■	Power OFF the Printer, remove and re-install the Duplex Module, and then
		Power ON the printer.

■ If the Duplex Module still fails, contact your Customer Support Center.

90 DocuPrint N4525 Network Laser Printer