OPERATING INSTRUCTIONS

Your heater is equipped with a technologically advanced 1 TouchTM electronic thermostat. You can set the heater to run continuously in manual mode or set the 1 TouchTM Thermostat to your desired tempera- ture setting. The 1 TouchTM thermostat will automatically turn the heater ON or OFF depending on the preset comfort level. The comfort level ranges between 60º and 80º Fahrenheit.

Manual Mode Instructions:

1.Plug the heater into a 120V AC electrical outlet.

2.To start the unit, push the MODE/OFF button once for the HIGH (1500 Watts) manual setting. (See fig. #1 and #2)

3.Press the button again for the LOW (1000 Watts) manual setting. (See fig. #1 and #2)

4.To stop the unit, press and hold the button for two seconds or keep pressing the button until all the temperature indicators are OFF.

Note: The Power Light will remain lit during operation. In Manual Mode, only the LOW or HIGH power light will be lit.

OSCILLATION INSTRUCTIONS

1.Select the desired control setting and press the oscillation button ON.

2.To stop oscillation, press the oscillation button OFF.

3.Please do not manually turn the unit; it is designed to turn only by motorized oscillation.

CLEANING/MAINTENANCE

During Season Care:

Always unplug the heater, before moving or cleaning.

1.Carefully wipe the unit with a soft, damp cloth. Please be very cautious near the motor and heating elements.

2.NEVER use abrasive or flammable solvents to clean the unit.

3.After cleaning, be sure to completely dry the unit with a cloth or towel.

After Season Care:

1.Store heater in a cool, dry location.

2.Holmes recommends that you store the unit in its original carton.

1 TOUCHTM THERMOSTAT INSTRUCTIONS

To take advantage of the 1 TouchTM Thermostat continue to press the MODE/OFF button until the desired temperature is set in either the HIGH (1500 Watt) or LOW (1000 Watt) setting. When ambient temperature rises above the set temperature, the heater will stop. When the ambient temperature drops below the set temperature, the heater will turn on automatically.

Note: When the 1 TouchTM thermostat is set, either the HIGH or LOW power light, and the set temperature light will remain lit during operation. (See fig. #1 and #2)

Note: It is normal for the heater to cycle ON and OFF as it maintains the preset temperature. To prevent the unit from cycling, you need to raise the thermostat setting.

Note: 1 TouchTM has memory. The 1 TouchTM thermostat will remember the previous temperature setting after the unit has been turned off. However, if the unit is unplugged, the 1 TouchTM thermostat will be reset and will no longer remember the previous temperature setting.

TROUBLESHOOTING

If your heater fails to operate:

•Make sure the electrical outlet or circuit breaker is working.

•Check for obstructions. If you find an obstruction turn the heater OFF, and UNPLUG THE UNIT. Carefully remove the obstruction and follow the reset instructions.

•The thermostat might be set too low. Press the MODE/OFF button until the hester restarts.

If your heater fails to oscillate:

•Make sure the oscillation button is pressed to the ON position.

Please DO NOT attempt to open or repair the heater. Please see the Warranty for Service Instructions.

ILLUSTRATIONS

Figure 1

C

B

 

A. Power Lights

A

 

B. MODE/OFF Control

 

C. Temperature Set Lights

 

 

D. Carry Handle (not visible)

 

E.

Oscillation Switch

 

 

F.

Oscillation Base

 

 

 

 

E

F

Figure 2

A.Set Temperature Light

B.Low Power (1000 watts)

C.High Power (1500 watts)

D.MODE/OFF Control

CONTROL PANEL CLOSE-UP

A

C

B

/Off

 

D

Page 2 Page 4
Page 3
Image 3
Holmes HCH41261 Operating Instructions, Oscillation Instructions, Cleaning/Maintenance, Touchtm Thermostat Instructions
Page 2 Page 4

HCH41261 specifications

The Holmes HCH41261 is an exceptional air purifier designed to enhance indoor air quality, making it an ideal choice for those seeking a cleaner, healthier living environment. Its sleek design and compact size enable streamlined integration into various home settings without occupying much space.

One of the standout features of the HCH41261 is its advanced filtration system. It employs a True HEPA filter, which effectively captures 99.97% of airborne particles as small as 0.3 microns. This includes dust, pollen, pet dander, smoke, and even some bacteria and viruses. The HEPA filter ensures that the air you breathe is free from common allergens, making it especially beneficial for allergy sufferers and those with respiratory conditions.

In addition to the HEPA filter, the HCH41261 is equipped with an activated carbon filter that plays a pivotal role in removing odors from the air. This technology is particularly valuable for households with pets, smokers, or kitchens where cooking odors can linger. The combination of HEPA and activated carbon filtration means the HCH41261 excels in both particle and odor removal.

Another notable characteristic of the Holmes HCH41261 is its user-friendly interface. The purifier features adjustable settings that allow users to customize fan speeds according to their preferences. Whether you desire a quiet operation for nighttime use or a more powerful setting for rapid air cleaning, the HCH41261 can accommodate your needs.

Energy efficiency is also a key feature of this model. It is designed to consume minimal energy while effectively purifying the air, making it a cost-effective solution for continuous use. Many models also feature an automatic shut-off function, which engages when the filter needs replacing, ensuring that the purifier operates at peak performance.

The HCH41261 is particularly well-suited for small to medium-sized rooms. Its lightweight design allows for easy portability, enabling users to move it from room to room as needed. Overall, the Holmes HCH41261 offers an excellent combination of effective air purification, user convenience, and aesthetic appeal, making it a worthwhile investment for improved indoor air quality.
Top Page Image Contents