3.OPERATION (CONT)
3.To change the setting, press the door setting button once will advance the timer by 10 seconds. i.e. if the original timer setting is at 10 seconds, pressing the door setting button once will result in 20 seconds, and you will then hear 2 beeps. The timer setting will be back to 10 seconds if you press the door setting button when the timer setting is at 50 seconds.
4.Once you have selected the desired setting, press and hold the door setting button for 3 seconds, you will hear a long beep and the orange LED will be off. You have now changed the timer setting.
4.OTHER SWING DOOR OPENER ACCESSORIES
The swing door opener can work with different accessories include: keychain/wallmount transmitter,
5. FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference that may cause undesired operation.
WARNING:
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful inter- ference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment dose cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
6. CE
Declaration of Conformity
This equipment complies with the requirements relating to electromagnetic compatibility, EN
7. WARRANTY
If, within one year from date of purchase, this product should become defective (except battery), due to faulty workmanship or materials, it will be repaired or replaced, without charge. Proof of purchase and a Return Authorization are required.
8. CUSTOMER SERVICE
If you would like to order Skylink’s products or have difficulty getting them to work, please :
1.visit our FAQ section at www.skylinkhome.com , or
2.email us at support@skylinkhome.com , or
3.call our toll free at
CUSTOMER SERVICE
17 Sheard Avenue, Brampton, Ontario, Canada L6Y 1J3 Email:support@skylinkhome.com http://www.skylinkhome.com
P/N. 101Z433
US Patent. 6243000B1 ©2006 SKYLINK GROUP
