Soundstream Technologies Class A 5.0 Wiring Diagram, REFERENCE Class A Amplifier Fuse Values

Class A

8

(Continued from page 12)

of blown power supply fuse, the “Fault” indicator on the top panel will light. The fuse is accessible from the front panel of the amplifier. See the chart below to determine the fuse value. Never replace the fuses with a higher value than what is supplied. This may result in amplifier damage and will

REFERENCE Class A Amplifier Fuse Values

Amplifier	Amplifier Fuse	Battery Fuse /
		Circuit Breaker
Class A 5.0	40 amp Maxi-Fuse	60 amp
Class A 10.0	80 amp Maxi-Fuse	100 amp

REMOTE TURN-ON

Connect the “Remote” to the turn-on lead from the source unit. When +12 volts is received, the amplifier will turn on.

SIGNAL CABLE

Use a high-quality cable that will be easy to install and has minimal signal loss to guarantee optimum performance. Soundstream’s DL￿1 and SL￿1 are ideal when using the Unbalanced RCA inputs. While using the Balanced DIN input, use the cable supplied with the BLT.

SPEAKER CABLE

The REFERENCE Class A amps will accept up to 8 gauge speaker cable. Use a high quality, flexible, multi-strand cable for best performance and longevity. Soundstream Speaker120 & 160 (12 and 16 gauge) are ideal.

WIRING DIAGRAM

13