Operation
CONFIGURATION DISPLAY
When you apply power to the ES30TI, a configuration screen appears. This screen displays the selected protocol, video format, lens type, and frame rate. The following screen shows the basic configuration information:
ESPRIT ES30TI X.XX
CONFIGURE DONE
D ADDRESS X
P ADDRESS X
COMM XXXX, X, X
VIDEO FORMAT: | XXXX |
LENS TYPE: | XXXXMM |
FRAME RATE: | XX FPS |
The displayed information depends on the selected protocol (Coaxitron, Pelco D, or Pelco P).
This screen only appears if the Power Up option is set to Default. Also, this screen continues to appear until you move the system. For all other settings, the system bypasses this screen. (Refer to Power Up Mode on page 37 for more information.)
HOW TO OPERATE YOUR SYSTEM
Operation | How to Control |
|
|
Pan/Tilt | Move joystick left/right and up/down. |
|
|
Scanning |
|
Stop scan | Call preset 96. |
Random scan | Call preset 97. |
Frame scan | Call preset 98. |
Auto scan | Call preset 99. |
|
|
Digital Zoom | To use digital zoom: |
| – Press the Zoom Tele button to select 2X. |
| – Press the Zoom Wide button to return to full screen. |
| Refer to Zoom and Zoom Line on page 51 for more information. |
| NOTE: On some controllers, such as the KBD300A, turn the joystick to the left or right to use digital |
| zoom. Refer to the documentation supplied with the controller. |
|
|
Sharpness | To change sharpness from the controller (refer to Sharpness on page 46 for more information): |
| – Press the Focus Near button to increase sharpness to the next higher setting. |
| – Press the Focus Far button to decrease sharpness to the next lower setting. |
| Changing sharpness also changes the AGC Mode settings. As a result, the Profile setting changes to |
| Modified. (Refer to AGC Mode on page 20 and Profile on page 38 for more information.) |
|
|
Display Type | To quickly select a Display Type: |
Switch to Black Hot | Call preset 85. |
Switch to White Hot | Call preset 86. |
Switch to Color 1 | Call preset 87. |
Switch to Rain 1 | Call preset 88. |
| Refer to Display Type on page 28 for more information. |
|
|
Delay FFC | To delay the Flat Field Correction (FFC) process for at least one minute, press the Iris Close button. Use |
| this option when you are observing activity that would be interrupted by the FFC process. (Refer to Flat |
| Field Correction (FFC) on page 29 for more information.) |
|
|
Presets | For other presets, refer to the documentation supplied with the controller. |
|
|
Patterns | Refer to the documentation supplied with the controller. |
|
|
14 |
