c.Connect the wiring for a
Green wire | RX- |
|
|
Red wire | RX+ |
|
|
Black wire | TX- |
|
|
White wire | TX+ |
|
|
d.Connect AUX 2 (optional). Refer to the schematic drawing for an example of how to wire AUX 2.
Orange wire | AUX 2 |
|
|
Blue wire | AUX 2 COMMON |
|
|
USER
ESPRITACCESSORY
K1
OMRON
D1
1N4005
AUX 2 | AUX 2 |
ORANGE WIRE |
|
AUX 2 COM | AUX 2 COM |
BLUE WIRE |
|
V1
32 VDC
NOTE: CURRENT MUST NOT EXCEED 40 mA.
Figure 5. AUX 2 Schematic Drawing
7.Install mount; refer to the installation manual supplied with the mount for instructions.
8.Turn on system power. If the red LED glows, turn off the power and proceed to the next step. If the red LED does not glow, refer to Maintenance and Troubleshooting on page 52.
10 |