Pelco ES30TI manual Display Type, Display Hot Warm Cool Cold Type

DISPLAY TYPE

MAIN MENU	Camera Menu
Display Type	White Hot
		<Camera>
<Power Up Mode>	Profile	Night
<Limit Stops>	<Sharp/Contrast/Bias>
<Other>
<System Information>	<Region of Interest>
<Factory Defaults>	<Flat Field Correction>
Exit	Exit

Display Type programs the specific palette of colors to represent the temperatures in the thermal image. These colors are not calibrated to a specific temperature. Rather, they represent the temperature variations within the thermal image. The following table lists the available display types and their color palettes. These palettes show the range of colors from hot temperatures to cold temperatures.

Display		Hot		Warm			Cool			Cold
Type
White Hot	White		Near White	Light Gray	Gray	Gray		Dark Gray	Near Black		Black
Black Hot	Black		Near Black	Dark Gray	Gray	Gray		Light Gray	Near White		White
Blue/Red	Red		Near White	Light Gray	Gray	Gray		Dark Gray	Near Black		Blue
Rain 1	White		Red	Yellow	Green	Blue		Purple	Magenta		Black
Rain 2	White		Yellow	Red	Light Green	Dark Green		Light Blue	Dark Blue		Black
Color 1	White		Light Yellow	Yellow	Dark Yellow	Light Brown		Brown	Dark Brown		Black
Color 2	White		Yellow	Light Orange	Orange	Red		Purple	Dark Purple		Black
Color 3	White		Light Yellow	Yellow	Light Orange	Orange		Red	Dark Red		Black
Color 4	White/Red		Orange	Light Green	Green	Light Blue		Blue	Purple		Magenta/Black
Color 5	White		Light Orange	Orange	Red	Magenta		Light Purple	Purple		Black
Color 6	White		Yellow	Orange	Red	Magenta		Purple	Dark Purple		Black
Color 7	White		Yellow	Light Orange	Orange	Red		Magenta	Dark Purple		Black

The default is White Hot.

NOTE: For a full color representation of each color palette, go to

pelco.com/espritTIpalettes/Pelco_ES30TI_Series_Esprit_Positioning_System_Palettes_manual.PDF.

To program the display type:

1.Program preset 95 (28). The main menu appears.

2.Position the cursor (>) beside <Camera>. Press the Iris Open button; the menu appears.

3.Position the cursor (>) beside Display Type. Press the Iris Open button; the cursor moves to the right.

4.Move the joystick up or down to view the available selections.

5.Do one of the following:

•Select: Press the Iris Open button to select the option.

•Cancel: Press the Iris Close button to leave the setting as is.

You may test each one to find the best display type for your installation.

You can also use the following presets to quickly select one of the following display types:

Switch to Black Hot	Call preset 85
Switch to White Hot	Call preset 86
Switch to Color 1	Call preset 87
Switch to Rain 1	Call preset 88

28 C1307M-C (8/07)