PROFILE
MAIN MENU |
|
| Camera Menu | ||
|
|
|
| Display Type | White Hot |
<Camera> |
|
| |||
<Power Up Mode> |
|
|
|
| |
|
| Profile | Night | ||
<Limit Stops> |
|
| <Sharp/Contrast/Bias> | ||
<Other> |
|
| |||
<System Information> |
|
| <Region of Interest> | ||
<Factory Defaults> |
|
| <Flat Field Correction> | ||
Exit |
|
| Exit |
| |
Profile lets you activate a specific group of settings (Sharpness, Hot Bias, Contrast, or AGC Mode), as follows:
•Night, Day, Fog, Rain: These four preconfigured groups of profile settings give the best
•Custom 1, Custom 2: These two groups of profile settings are configured by the user. After changing one or more profile settings, use the Save Profile feature to save the custom profile settings (refer to Save Profile on page 44).
•Modified: This option appears in the Profile list whenever you change any profile setting (Sharpness, Hot Bias, Contrast, or AGC Mode). The camera saves all profile setting changes into memory, but it does not automatically save them to the Custom 1 or Custom 2 profiles. If you select a different profile without saving the profile setting changes, the new profile replaces the user profile settings.
The default is Night.
To select a profile:
1.Program preset 95 (28). The main menu appears.
2.Position the cursor (>) beside <Camera>. Press the Iris Open button; the menu appears.
3.Position the cursor (>) beside Profile. Press the Iris Open button; the cursor moves to the right.
4.Move the joystick up or down to view the available selections.
5.Do one of the following:
•Select: Press the Iris Open button to select the option.
•Cancel: Press the Iris Close button to leave the setting as is.
38 |
