Limit Stops Menu
To program scan limit stops using the Limit Stops menu:
1.Program preset 95 (28). The main menu appears.
2.Position the cursor (>) beside <Limit Stops>. Press the Iris Open button; the menu appears.
3.Position the cursor (>) beside Set Scan Limits. Press the Iris Open button. The message PRESS IRIS OPEN TO SET LEFT LIMIT appears.
4.Push the joystick left until the camera reaches the leftmost limit, or position, for the camera.
5.Press the Iris Open button. This is the left scan limit. The message PRESS IRIS OPEN TO SET RIGHT LIMIT appears.
6.Push the joystick right until the camera reaches the rightmost limit, or position, for the camera.
7.Press the Iris Open button. This is the right scan limit.
8.Exit the Limit Stops menu.
Clear Scan Limit Stops
To clear the scan limit stops:
1.Program preset 95 (28). The main menu appears.
2.Position the cursor (>) beside <Limit Stops>. Press the Iris Open button; the menu appears.
3.Position the cursor (>) beside Clear Scan Limits. Press the Iris Open button; the cursor briefly changes to an asterisk (*) to show that the limit stops have been disabled.
34 |
