RESTORE ALL DEFAULTS
MAIN MENU |
|
| Factory Defaults Menu | |
<Camera> |
|
| Reset Camera | |
<Power Up Mode> |
|
| Restore Camera Defaults | |
<Limit Stops> |
|
| Restore All Defaults | |
<Other> |
|
| Exit | |
<System Information> |
|
|
| |
<Factory Defaults> |
|
|
|
|
Exit |
|
|
| |
Restoring all defaults returns the settings on all menus and submenus to their defaults. This function also clears all presets and patterns.
Turning off power does not restore the camera to its default settings. Camera settings are retained in memory. When the power is turned back on, the settings will be the same as they were when the power was turned off.
WARNING: After restoring all defaults, you will have to configure all camera settings from their factory defaults.
To restore all defaults:
1.Program preset 95 (28). The main menu appears.
2.Position the cursor (>) beside <Factory Defaults>. Press the Iris Open button; the menu appears.
3.Position the cursor (>) beside Restore All Defaults.
4.Press the Iris Open button to restore all settings to their factory defaults. The cursor briefly changes to an asterisk (*) while the camera restores all default settings.
42 |
