PARK TIME MINUTES
MAIN MENU |
|
| Other Menu |
| ||
<Camera> |
|
| Temp Units |
| Celsius | |
<Power Up Mode> |
|
| Park time minutes | 0 | ||
<Limit Stops> |
|
| Scan Speed deg/s | 7 | ||
<Other> |
|
|
| Pattern Length |
| 1.5 min |
<System Information> |
|
| Spd Profile | 90 MPH Wind | ||
<Factory Defaults> |
|
| <Zone Blank> |
|
| |
Exit |
|
| <Az/El/Direction> |
| ||
|
|
|
| Exit |
|
|
Use this feature to park at the preset 1 position after a specific number of minutes of control inactivity. You can set this number from 1 minute to 720 minutes (12 hours), or you can set it to zero to disable this feature. The default is 0 (disabled).
NOTE: You must program Preset 1 for the system to use this feature.
To change the park time:
1.Program preset 95 (28). The main menu appears.
2.Position the cursor (>) beside <Other>. Press the Iris Open button; the menu appears.
3.Position the cursor (>) beside Park Time Minutes. Press the Iris Open button; the cursor moves to the right.
4.Move the joystick up or down to change the park time.
5.Do one of the following:
•Select: Press the Iris Open button to select the option.
•Cancel: Press the Iris Close button to leave the setting as is.
35 |
