HOT BIAS
MAIN MENU |
|
| Camera Menu |
|
| Sharp/Contrast/Bias Menu | ||||
|
|
|
| Display Type | White Hot |
|
|
|
| |
<Camera> |
|
|
|
|
|
| ||||
|
|
| AGC Mode | Manual | ||||||
<Power Up Mode> |
|
| Profile | Night |
|
| Sharpness | Medium | ||
<Limit Stops> |
|
|
|
|
|
|
| Contrast | 64* | |
<Other> |
|
| <Sharp/Contrast/Bias> |
|
|
|
|
| ||
|
|
| Hot Bias | 100* | ||||||
<System Information> |
|
| <Region of Interest> |
|
| Save Profile | Custom 1 | |||
<Factory Defaults> |
|
| <Flat Field Correction> |
|
| Exit |
| |||
Exit |
|
| Exit |
|
|
|
|
|
|
Use the Hot Bias option to adjust how the color palette represents the temperature range of the image. The Hot Bias range is 1 to 200. The default is 100.
Increase the Hot Bias setting to push the color palette to a warmer range of temperatures. Warmer temperatures appear as hot; cooler temperatures appear as warmer; cold temperatures appear as cool.
Decrease the Hot Bias setting to push the color palette to a cooler range of temperatures. Cooler temperatures appear as cold; warmer temperatures appear as cooler; hot temperatures appear as warm.
For example, when using the White Hot display type, decreasing the Hot Bias adjusts whites to grays and grays to black. Increasing the Hot Bias setting adjusts blacks to grays and grays to whites.
NOTE: This option is only available when AGC Mode is set to Manual. If AGC Mode is set to Automatic, change AGC Mode to Manual before proceeding (refer to AGC Mode on page 20).
To change the hot bias:
1.Program preset 95 (28). The main menu appears.
2.Position the cursor (>) beside <Camera>. Press the Iris Open button; the menu appears.
3.Position the cursor (>) beside <Sharp/Contrast/Bias>. Press the Iris Open button; the menu appears.
4.Position the cursor (>) beside Hot Bias. Press the Iris Open button; the cursor moves to the right.
5.Move the joystick up or down until the desired Hot Bias setting appears.
6.Do one of the following:
•Select: Press the Iris Open button to select the option.
•Cancel: Press the Iris Close button to leave the setting as is.
*These options only appear when AGC Mode is set to Manual.
31 |