3. Attach the base of the system to an Esprit mount (EWM or EPP) with the three flathead
MOUNTING
SCREWS
MOUNT
BASE
Figure 3. Attaching the Base
4.Route the wires and cables through the center of the Esprit mount. Reinstall the transformer module into the base. The transformer module can be positioned in the mount base in only one orientation.
120/230 VOLTAGE SELECTOR SWITCH
Figure 4. Routing Wires and Cables
5.120/230 VAC models only: Set the 120/230 voltage selector switch on the transformer to the appropriate voltage.
6.Connect wires and cables.
a. Connect to AC power. Use the two supplied clamp connectors.
| 120/230 VAC | |
|
|
|
Black wire |
| Input (AC Line) |
|
|
|
White wire |
| AC Neutral |
|
|
|
Green wire |
| Ground |
|
|
|
| 24 VAC | |
|
|
|
White wire |
| AC HI (HOT) |
|
|
|
White wire |
| AC HI (NEUT) |
|
|
|
b.Connect the video coaxial cable to the BNC connector.
9 |
