TXB Series Translator Board Installation (Optional)
Pelco’s TXB Series allows controllers from other companies to communicate with the Esprit system.
To install a TXB Series board, remove the left cover of the pan/tilt. Once the cover is removed, refer to the manual supplied with the translator board to complete the installation.
REMOVING THE PAN/TILT COVER
1.Unscrew the Phillips screw located on the left cover of the pan/tilt.
2.Remove cover and place to the side.
PLUG
PHILLIPS
SCREW
Figure 8. Removing the Pan/Tilt Cover
12 |