SHARPNESS
MAIN MENU |
|
| Camera Menu |
|
| Sharp/Contrast/Bias Menu | ||||
|
|
|
| Display Type | White Hot |
|
|
|
| |
<Camera> |
|
|
|
| AGC Mode | Automatic | ||||
<Power Up Mode> |
|
| Profile | Night |
|
|
|
| ||
|
|
| Sharpness | Medium | ||||||
<Limit Stops> |
|
|
|
|
|
|
| Contrast | 64* | |
<Other> |
|
| <Sharp/Contrast/Bias> |
|
|
| Hot Bias | 100* | ||
<System Information> |
|
| <Region of Interest> |
|
| Save Profile | Custom 1 | |||
<Factory Defaults> |
|
| <Flat Field Correction> |
|
| Exit |
| |||
Exit |
|
| Exit |
|
|
|
|
|
|
Use the Sharpness setting to set the digital sharpness of the camera. Settings include Lowest, Low, Medium, High, and Highest. The default is Medium.
Increasing the Sharpness setting can enhance image detail in some scenes; higher Sharpness settings also increase image noise. Decreasing the Sharpness setting can soften image detail in some scenes, that is, lose some image detail; however, lower Sharpness settings also decrease image noise. Select the setting that is best for the scene.
NOTE: You can change the Sharpness setting when AGC Mode is set to either Automatic or Manual.
To set the sharpness of the camera:
1.Program preset 95 (28). The main menu appears.
2.Position the cursor (>) beside <Camera>. Press the Iris Open button; the menu appears.
3.Position the cursor (>) beside <Sharp/Contrast/Bias>. Press the Iris Open button; the menu appears.
4.Position the cursor (>) beside Sharpness. Press the Iris Open button; the cursor moves to the right.
5.Move the joystick up or down until the desired Sharpness setting appears. As you move through settings, the sharpness changes on the monitor.
6.Do one of the following:
•Select: Press the Iris Open button to select the option.
•Cancel: Press the Iris Close button to leave the setting as is.
NOTE: You can also adjust the Sharpness setting by using the Focus Near and Focus Far buttons on your controller (refer to How to Operate Your System on page 14).
*These options only appear when AGC Mode is set to Manual.
46 |