Programming
1.Access main menu (preset 95).
2.Make main menu selections.
Joystick: Move up or down to position cursor to toggle between selections.
Iris Open: Enter.
Iris Close: Cancel.
NOTE: The menus on this page show the default settings.
MAIN MENU
<Camera>
<Power Up Mode> <Limit Stops> <Other>
<System Information> <Factory Defaults> Exit
PRESETS
The following presets are reserved for special functions.
Preset Function
1Park
33Flip command
34Pan zero command
85Switch to Black Hot
86Switch to White Hot
87Switch to Color 1
88Switch to Rain 1
89Do manual FFC
90Manual limit stops (left)
91Manual limit stops (right)
92Auto limit stops (left)
93Auto limit stops (right)
95Select controller programming menu
96Stop a scan
97Random scan
98Frame scan
99Auto scan
NOTE: For American Dynamics controllers with only 32 presets, set switch
99 becomes 32
98 becomes 31
97 becomes 30
96 becomes 29
95 becomes 28
94 becomes 27
93 becomes 26
92 becomes 25
91 becomes 24
90 becomes 23
89 becomes 22
88 becomes 21
Camera Menu
Display Type | White Hot |
Profile | Night |
<Sharp/Contrast/Bias> <Region of Interest> <Flat Field Correction> Exit
Power Up Mode Menu
Power Up | Default |
Exit |
|
Limit Stops Menu
Limit Stops |
| Off |
Set Man Limits |
|
|
Clear Man Limits |
| |
Set Scan Limits |
|
|
Clear Scan Limits |
| |
Exit |
|
|
Other Menu | ||
Temp Units |
| Celsius |
Park time minutes | 0 | |
Scan Speed deg/s | 7 | |
Pattern Length |
| 1.5 min |
Spd Profile | 90 MPH Wind | |
<Zone Blank> |
|
|
<Az/El/Direction> |
| |
Exit |
|
|
System Info Menu | ||
Software Version | x.xx | |
Part Number |
| ES30TI |
Serial Number |
| xxxxxxxxx |
Video Format |
| xxxx |
Lens Type |
| xxxxxmm |
Frame Rate |
| xx FPS |
<Camera Information> Exit
Factory Defaults Menu
Reset Camera
Restore Camera Defaults
Restore All Defaults
Exit
Sharp/Contrast/Bias Menu
AGC Mode | Automatic |
Sharpness | Medium |
Contrast | 64* |
Hot Bias | 100* |
Save Profile | Custom 1 |
Exit |
|
Region of Interest Menu | |
ROI | Off |
Region | Center† |
Percent | 50† |
Exit |
|
Flat Field Correction Menu | |
Frequency <min> | 2 |
Temp Change <C> | 1.0 |
Do Manual FFC |
|
Exit |
|
Camera Info Menu
Camera FW Ver. | x.xx.xx |
Camera SW Ver. | x.xx.xx |
Camera Serial | xxx |
Camera Temp | xx.x C |
Exit |
|
Zone Blank Menu
Video Blank Zone | 1 Off |
| 2 Off |
| 3 Off |
| 4 Off |
| 5 Off |
| 6 Off |
| 7 Off |
Exit | 8 Off |
| |
Az/El/Direction |
|
Set Azimuth Zero |
|
Az/El | Left |
Az/El Line | 10 |
Direction | Right |
Direction Line | 10 |
Zoom | Center |
Zoom Line | 10 |
Disp Duration | 2 |
Exit |
|
*These options only appear when AGC Mode is set to Manual.
†These options only appear when ROI is set to On.
If limit stops are disabled, presets
Each menu item is described in greater detail. Sections for each menu item appear alphabetically, starting on page 20.
17 |
