SPEED PROFILE
MAIN MENU |
|
| Other Menu |
| ||
<Camera> |
|
| Temp Units |
| Celsius | |
<Power Up Mode> |
|
| Park time minutes | 0 | ||
<Limit Stops> |
|
| Scan Speed deg/s | 7 | ||
<Other> |
|
|
| Pattern Length |
| 1.5 min |
<System Information> |
|
| Spd Profile | 90 MPH Wind | ||
<Factory Defaults> |
|
| <Zone Blank> |
|
| |
Exit |
|
| <Az/El/Direction> |
| ||
|
|
|
| Exit |
|
|
Use this feature to set the wind speed conditions for the location of the Esprit system. High winds may intefere with high speed turbo and preset panning. The speed profile provides the best panning speed for the wind conditions.
You can set two wind speed profiles:
•50 MPH Wind: Turbo and preset pan speeds are 100 degrees per second. In low wind conditions, the system has enough torque to pan at this higher speed.
•90 MPH Wind Turbo and preset pan speeds are 50 degrees per second. In high wind conditions, the system has enough torque to pan at this lower speed.
NOTE: For more information about Turbo Mode, refer to Turbo Mode on page 15.
The maximum pan speed in regular
The default is 90 MPH Wind.
To set the speed profile:
1.Program preset 95 (28). The main menu appears.
2.Position the cursor (>) beside <Other>. Press the Iris Open button; the menu appears.
3.Position the cursor (>) beside Spd Profile. Press the Iris Open button; the cursor moves to the right.
4.Move the joystick up or down to toggle between 50 MPH Wind and 90 MPH Wind.
5.Do one of the following:
•Select: Press the Iris Open button to select the option.
•Cancel: Press the Iris Close button to leave the setting as is.
47 |
