Pelco ES30TI manual Appendix, Switch Setting, SW1-5, SW1-6, SW1-7, SW1-8

Appendix

NOTE: Esprit will sense and automatically select input from Coaxitron control signals in either the standard or extended mode. Therefore, the DIP switch settings have no effect on Coaxitron control signals.

Table A. Switch Settings for SW1

		Switch Setting
Baud Rate	SW1-1	SW1-2	SW1-3
2400	OFF	OFF	OFF*
4800	ON	OFF	OFF*
9600	OFF	ON	OFF*

*SW1-3 is not used; set it in the OFF position.

Table B. Switch Settings for SW2

Switch Setting

	SW1-4		SW1-5	SW1-6	SW1-7	SW1-8
OFF*			Note (1)	Note (2)	Note (3)	Note (4)
NOTES:
(1)	SW1-5	OFF	For controllers with more than 32 presets.
		ON	For American Dynamics controllers (32 presets).
(2)	SW1-6	OFF	For all control systems except CM9502 with variable speed keyboards. For CM9502
			with fixed speed keyboards, set to OFF.
		ON	For CM9502 with variable speed keyboards for smoother joystick control.
(3)	SW1-7	OFF	RS-422 transmitter is not terminated.
		ON	RS-422 transmitter is terminated.
(4)	SW1-8	OFF	1.2 Vp-p video level.
		ON	1.0 Vp-p video level.

*SW1-4 is not used; set it in the OFF position.

54 C1307M-C (8/07)